Rockford Fosgate BD1000.1

jandar · 3rd August 2011, 08:59 PM

Hey everyone,

I have a old school Fosgate BD1000.1 that has some messed up terminals. The amp rocks out fine, but the terminals have stripped/stuck screws. Someone tore the terminals up before I got to it with a proper set of bits and such.

Does anyone know where to source a replacement terminal for the B+, ground, speaker?

niteowl · 4th August 2011, 06:50 PM

Hi Jandar
I used to do the warranty service for rockford in Canada. I still have a few parts around and a whole bunch of boards. I will look to see what I have and for the cost of postage I will send it to you.

Martin

jandar · 4th August 2011, 08:57 PM

Thanks so much for looking,

Here is the exact model just in case I got the model wrong.
http://i374.photobucket.com/albums/o...athan/amp3.jpg

Someone tried to drill out stuck screws and reamed em out badly, so I was looking to just replace the b+ and ground. The speakers are still fine.

niteowl · 5th August 2011, 02:08 AM

I know what you need. Those get screwed up easy when the set screws are played with when power is applied. The screws will arc a bit and almost weld them selfs in. Where are you located as these bits are heavy.

jandar · 5th August 2011, 02:25 AM

PM sent,

You rock, thanks a lot.

niteowl · 5th August 2011, 04:39 AM

No problem.

seankane · 5th August 2011, 06:00 AM

Hello niteowl do you have any other terminals you would like to sell and any boards you would sell?

niteowl · 5th August 2011, 05:12 PM

I will see what I have. Most of the boards are blown amps, I just kept them for bits and pieces. I have bunch of different sizes. I have a cr@p load of fets (all new). I think posting pictures of what I have is a better way to show people.

niteowl · 5th August 2011, 10:11 PM

Look here Rockford Fosgate Parts For Sale

seankane · 6th August 2011, 01:07 AM

I would buy your whole lot of repair parts plus the boards you have please let me know asap. Send me a PM if you would want to discuss it privately...Thanks....Sean

3rd August 2011, 08:59 PM	#1
jandar diyAudio Member Join Date: Aug 2011	Rockford Fosgate BD1000.1 Hey everyone, I have a old school Fosgate BD1000.1 that has some messed up terminals. The amp rocks out fine, but the terminals have stripped/stuck screws. Someone tore the terminals up before I got to it with a proper set of bits and such. Does anyone know where to source a replacement terminal for the B+, ground, speaker?

5th August 2011, 06:00 AM	#7
seankane diyAudio Member Join Date: May 2010 Location: Washington State	Hello niteowl do you have any other terminals you would like to sell and any boards you would sell? __________________ Pyramid 46 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch

6th August 2011, 01:07 AM	#10
seankane diyAudio Member Join Date: May 2010 Location: Washington State	I would buy your whole lot of repair parts plus the boards you have please let me know asap. Send me a PM if you would want to discuss it privately...Thanks....Sean __________________ Pyramid 46 Amp Power Supply----Fluke 787 Processmeter----Tektronix 465 Scope----Velleman HPS40 Scope----Soldering Iron----Desoldering Iron----Hejet HJ 500-S Heatgun----DM4070 Digital LCR Meter----Propane Torch

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rockford Power BD1000.1	Dr Zeus	Car Audio	20	3rd May 2012 06:12 PM
Rockford Fosgate BD1000	seankane	Car Audio	133	1st April 2011 06:57 AM
rockford fosgate BD1000	mike49504	Car Audio	73	10th February 2011 06:05 PM
Rockford Fosgate BD1000	mike49504	Car Audio	1	9th January 2011 11:37 AM
Rockford Fosgate	dtisme	Car Audio	1	5th October 2010 11:39 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th August 2011, 06:50 PM	#2
niteowl diyAudio Member Join Date: Sep 2005	Hi Jandar I used to do the warranty service for rockford in Canada. I still have a few parts around and a whole bunch of boards. I will look to see what I have and for the cost of postage I will send it to you. Martin

4th August 2011, 08:57 PM	#3
jandar diyAudio Member Join Date: Aug 2011	Thanks so much for looking, Here is the exact model just in case I got the model wrong. http://i374.photobucket.com/albums/o...athan/amp3.jpg Someone tried to drill out stuck screws and reamed em out badly, so I was looking to just replace the b+ and ground. The speakers are still fine.

5th August 2011, 02:08 AM	#4
niteowl diyAudio Member Join Date: Sep 2005	I know what you need. Those get screwed up easy when the set screws are played with when power is applied. The screws will arc a bit and almost weld them selfs in. Where are you located as these bits are heavy.

5th August 2011, 02:25 AM	#5
jandar diyAudio Member Join Date: Aug 2011	PM sent, You rock, thanks a lot.

5th August 2011, 04:39 AM	#6
niteowl diyAudio Member Join Date: Sep 2005	No problem.

5th August 2011, 05:12 PM	#8
niteowl diyAudio Member Join Date: Sep 2005	I will see what I have. Most of the boards are blown amps, I just kept them for bits and pieces. I have bunch of different sizes. I have a cr@p load of fets (all new). I think posting pictures of what I have is a better way to show people.

5th August 2011, 10:11 PM	#9
niteowl diyAudio Member Join Date: Sep 2005	Look here Rockford Fosgate Parts For Sale

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read