diyAudio (
-   Car Audio (
-   -   Hifonics Brutus BX1605D (

mike49504 25th July 2011 02:19 AM

Hifonics Brutus BX1605D
This amp is using the IRF3710'S for the outputs.. Do i need to order the Z version or the non Z version??

Perry Babin 25th July 2011 03:38 AM

In amps that use the HIP 4080 and originally used the IRF3710 (no Z), I've had NO luck with the non-Z version. I've had absolutely no problem with the Z version.

mike49504 25th July 2011 04:17 AM

OK Do i need to replace the HIP4080 The amp comes on and play but goes into protection after a few mins..

I have to replace all outputs in the amp since someone only replaced 2 on 1 side of out the 12 total..

Perry Babin 25th July 2011 05:12 AM

I don't know if it needs to be replaced but if you have to order parts, you may as well order one.

Confirm that the Zener (ZD1?) is within tolerance.

All times are GMT. The time now is 10:00 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2