jbl bp-1200.1 question

ampjunkielikeme · 01:23 PM

what can i used to replace the 200v 10uf non polar capacitors inside a jbl 1200.1 ?

i had the replacement part number wrote down , and lost it...lol

Perry Babin · 20th July 2011, 03:41 PM

If the originals aren't available from JBL, you can use the following from Digi-Key.
EF2106-ND

They are a different style and a bit larger so they may be a tight fit. I've never used them in this particular amp but I've used a lot of them in memphis amps.

Dr Zeus · 20th July 2011, 03:46 PM

I have a JBL Crown BP-500.1 which may be similar but I dont see any 200v 10uf caps. Does anything on this board look similar to what you need?

Also, if you call Harman/JBL and give them the part location on the PCB they can tell you what part number it likely is. You can also order parts from them.

Perry Babin · 20th July 2011, 04:04 PM

EC111211000 is the JBL part number.

20th July 2011, 01:21 PM	#1
ampjunkielikeme diyAudio Member Join Date: Feb 2009	jbl bp-1200.1 question what can i used to replace the 200v 10uf non polar capacitors inside a jbl 1200.1 ? i had the replacement part number wrote down , and lost it...lol Last edited by ampjunkielikeme; 20th July 2011 at 01:23 PM.

20th July 2011, 03:41 PM	#2
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	If the originals aren't available from JBL, you can use the following from Digi-Key. EF2106-ND They are a different style and a bit larger so they may be a tight fit. I've never used them in this particular amp but I've used a lot of them in memphis amps. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

20th July 2011, 04:04 PM	#4
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	EC111211000 is the JBL part number. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JBL BP 1200.1 Project	poopydoopynoopy	Car Audio	45	28th March 2010 01:41 AM
(Europe only) FS: BB OPA627 AP/AU/BP - OPA637 AP/BP - AD797	cartman	Swap Meet	9	21st July 2006 08:52 AM
JBL L55 Question	zipplok	Multi-Way	1	30th September 2005 05:36 AM
JBL L-150 Question	Regis	Multi-Way	6	11th February 2004 11:11 AM
JBL Midrange Question	Regis	Multi-Way	3	29th January 2004 10:04 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th July 2011, 03:46 PM	#3
Dr Zeus diyAudio Member Join Date: Oct 2010	I have a JBL Crown BP-500.1 which may be similar but I dont see any 200v 10uf caps. Does anything on this board look similar to what you need? Also, if you call Harman/JBL and give them the part location on the PCB they can tell you what part number it likely is. You can also order parts from them.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read