diyAudio (
-   Car Audio (
-   -   MTX Thunder 6500 D (

mike49504 15th July 2011 04:20 PM

MTX Thunder 6500 D
This amp uses HUF75339P for the power supply fets..

Would the IRFZ48N's works as replacements?

Perry Babin 15th July 2011 08:10 PM

They'll likely work but may not be quite as reliable.

mike49504 19th July 2011 01:10 AM

Ok the outputs are FB42N20D's Is there a good sub for theese??

Perry Babin 19th July 2011 01:49 AM

I'd recommend using the original part number. In the past, I've used IRF3415s. I don't know if there were any revisions between the amp that originally used the SSP45N20A and the one you have. In my notes, I see that the IRFB42N20D did not work in the place of the SSP54N20A so there may well be some differences.

m4ick 21st July 2011 11:01 PM

I can verify that the last 6500D I saw had 42N20Ds in it, I used the 3415s and the amp has not come back to me yet.

All times are GMT. The time now is 01:56 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio