Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Trouble shooting my amp
Trouble shooting my amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th July 2011, 06:25 AM   #1
pimster987 is offline pimster987
diyAudio Member
 
Join Date: Apr 2011
Default Trouble shooting my amp

I have an amplifier that switches between on and off. Its not the connections to the amp because I hooked up another amp and it worked fine. I'm guessing its a faulty transistor. I want to check the transistors but don't know how to remove the metal flaps protecting the transistor. How do I remove these?

Last edited by pimster987; 10th July 2011 at 06:35 AM.
  Reply With Quote
Old 10th July 2011, 06:41 AM   #2
mike49504 is offline mike49504  United States
diyAudio Member
 
Join Date: Sep 2006
This link should tell u how to remove them without breaking them or damaging the transistors


Jl audio 500/1 Transistor clamps
  Reply With Quote
Old 10th July 2011, 06:58 AM   #3
pimster987 is offline pimster987
diyAudio Member
 
Join Date: Apr 2011
Thanks that helped alot.
  Reply With Quote
Old 10th July 2011, 07:21 AM   #4
pimster987 is offline pimster987
diyAudio Member
 
Join Date: Apr 2011
Alright I think I might have figured out what was wrong. The four transistors D11-D14 that are labeled MOSPEC u16c20c have legs 1 and 3 shorted. I actually have two amps that won't power up and I just checked both of them and all the transistors labeled D11-D14 on both amps legs 1 and 3 are shorted. Are these transistors suppose to be like this?


Edit: After looking up the part number the datasheets say it is a super fast diode used for power supply switching. If these are just diode why does it have three legs? Or is this why the multimeter is reading a short because two of the legs are connected.

Last edited by pimster987; 10th July 2011 at 07:34 AM.
  Reply With Quote
Old 10th July 2011, 02:19 PM   #5
Perry Babin is offline Perry Babin  United States
diyAudio Member
 
Join Date: Nov 2003
Location: Louisiana
They're dual diodes. If you look up their datasheet, it will show their internal schematic diagram.

The outer legs appear shorted on common anode and common cathode, dual rectifiers because the outer legs are connected by the secondary windings of the power transformer.
  Reply With Quote

Reply


Trouble shooting my ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trouble Shooting for TDA1562Q Car Amp Junior Car Audio 7 3rd August 2017 09:17 PM
Need help in trouble-shooting my AES Sixpacs amp andy2 Tubes / Valves 2 12th January 2007 10:52 AM
help trouble shooting amp distortion mikebarg Solid State 38 13th May 2005 08:32 PM
Op amp trouble shooting Bose(o) Chip Amps 13 1st April 2005 08:37 PM
leach amp trouble shooting victordsouza Solid State 2 30th May 2004 04:22 PM


New To Site? Need Help?

All times are GMT. The time now is 05:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki