AVIC N1 Screen not calibrating...

bussdriver97 · 10th May 2011, 07:18 AM

I have a Pioneer AVIC N1 unit that is having touch screen issues. When I try to calibrate it in service mode in the first step it has an error message of "Invalid by the outside of permissible value."

It says this after tracing the white line on the outer edge of the screen. When moving on to step 2 of the setup when touching the points asked I have to touch either far right or far left of the screen...also the far left points do not even register when touching.

I know with the proper solution and instruction this is a problem I can repair myself.

PLEASE Help!

Thanks in advance for all advice and help!!!

bussdriver97 · 11th May 2011, 06:39 AM

After 3 hours of research on the web I found a solution to calibrating my screen and it worked after multiple tries! Well worth the time and effort!

Perry Babin · 11th May 2011, 06:45 AM

Post a link here. It may help someone else.

bussdriver97 · 11th May 2011, 07:03 AM

Hope this helps Perry... As I said it took me multiple tries and also fooling the hard drive by tracing inside the white lines ( taped off screen about 3/16 of an inch both right and left sides ) this will depend on your specific unit when calibrating. As the link says BE CAREFUL when doing this. Not following the steps in the link can cause permanent memory loss!!! only use steps 1-4!!! If an error message occurs in step one as I posted in the original post try moving the tape. Hope this can help someone as it surely has done for me!!!

Avic-N1 touch screen calibration... - FixYa

Thats the link! Good luck!!!

If anyone has questions I would be happy to help if possible.

10th May 2011, 07:18 AM	#1
bussdriver97 diyAudio Member Join Date: May 2011 Location: SC	AVIC N1 Screen not calibrating... I have a Pioneer AVIC N1 unit that is having touch screen issues. When I try to calibrate it in service mode in the first step it has an error message of "Invalid by the outside of permissible value." It says this after tracing the white line on the outer edge of the screen. When moving on to step 2 of the setup when touching the points asked I have to touch either far right or far left of the screen...also the far left points do not even register when touching. I know with the proper solution and instruction this is a problem I can repair myself. PLEASE Help! Thanks in advance for all advice and help!!!

11th May 2011, 06:45 AM	#3
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	Post a link here. It may help someone else. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AVIC-F90BT GPS problems	ZippyTs	Car Audio	3	23rd January 2011 06:28 PM
Pioneer Avic N1 needs repair...HELP!	SiSi	Car Audio	3	28th March 2010 03:05 AM
pioneer avic n1	mike49504	Car Audio	2	15th December 2009 11:33 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th May 2011, 06:39 AM	#2
bussdriver97 diyAudio Member Join Date: May 2011 Location: SC	After 3 hours of research on the web I found a solution to calibrating my screen and it worked after multiple tries! Well worth the time and effort!

11th May 2011, 07:03 AM	#4
bussdriver97 diyAudio Member Join Date: May 2011 Location: SC	Hope this helps Perry... As I said it took me multiple tries and also fooling the hard drive by tracing inside the white lines ( taped off screen about 3/16 of an inch both right and left sides ) this will depend on your specific unit when calibrating. As the link says BE CAREFUL when doing this. Not following the steps in the link can cause permanent memory loss!!! only use steps 1-4!!! If an error message occurs in step one as I posted in the original post try moving the tape. Hope this can help someone as it surely has done for me!!! Avic-N1 touch screen calibration... - FixYa Thats the link! Good luck!!! If anyone has questions I would be happy to help if possible.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)