I have the mentioned Zapco sitting here, bought it defective and missing it's fan.
Most of the problems are already solved, thanks to scott-leannes older thread,
but as I have to order parts it would be great to know what kind of fan was in there and where it was connected.
Most probably J6 next to the fan will be the connector, right?
But J6 has 4 poles, so who is who?
Regards Julian
Most of the problems are already solved, thanks to scott-leannes older thread,
but as I have to order parts it would be great to know what kind of fan was in there and where it was connected.
Most probably J6 next to the fan will be the connector, right?
But J6 has 4 poles, so who is who?
Regards Julian
It may be like a CPU fan on a computer.
Motherboard (CPU) 4 Pin Fan Connector Pinout - AllPinouts
Motherboard (CPU) 4 Pin Fan Connector Pinout - AllPinouts
Most probably not.
The fan has, from what I could see in an old brochure, just two pins/wires.
Here are the pics:
Zapco weiss
(Page/pic 6 is where I looked at.)
The fan has, from what I could see in an old brochure, just two pins/wires.
Here are the pics:
Zapco weiss
(Page/pic 6 is where I looked at.)
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.