diyAudio (
-   Car Audio (
-   -   Orion XTR 2250 OLD SCHOOL (

wyteboy 10th April 2011 07:49 AM

Hello all,

First let me thank everyone in advance your your help. I'm not new to the world of car audio, (Mods this is not an introduction) But I am new to the world or "amp repair," I know this is going to sound like a complete "noob" question, but I got the Orion XTR 2250, on a really good deal. The amp has been abused, to say the least. I remember these from "back in the day" and couldnt help myself and jumped on the oppertunity to buy it. My question is I have 5 wires running out of the amp

4.)Black with Yellow stripe
5.)Black with Red Stripe.

I believe the 2 black wires are the speaker wires, but I do not want to mess this amp up any more than it already is. So my question is, what exactly are the wires? just to show that i"m serious about working on tese amps, I also have 2 Earthquake PH10,000W/D1 amps, The afore mentioned Orion XTR, a MTX 5601 I believe, and 2 other Orions, Not sure the exact model numbers, as I still have to go pick them up. Once again, Thanks for your help.

warpedhifi 10th April 2011 11:54 AM

I think this is the same for the xtr's, but I could be wrong.

Wiring Codes for SX and HCCA
Orange = Right Positive
Black/Orange = Right Negative
Yellow = Left Positive
Black/Yellow = Left Negative
Blue = Remote Turn On

Hope this helps.

wyteboy 10th April 2011 10:54 PM

Thanks, That actually makes more sense than the black wires being speaker outputs. I'm going to try it that way, and see what happens.Thanks again.

All times are GMT. The time now is 06:45 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio