Orion NT Repair

AcuraTLSQ · 29th March 2011, 12:22 PM

Long shot but I thought I would ask to try to get an educated guess:

Orion NT200 #1. Pops a fuse as soon as power is applied to the remote turn on lead. Does not pop the fuse when +/- only applied.
Orion NT200 #2. Hissing noise from the power supply area of the board.
Orion NT100. Hissing noise from the power supply area of the board.

Both NT200's have buldging power supply caps.

I do not have the proper input cables to test if the two hissing NT's play music or not. They are new to me and wanted to verify they would power on. Found the above.

Long story short: Any ROUGH estimate on what it would cost to get these going to full spec and who is qualified with the time to do it right away?

Proper cabling and termination is on the way and the vehicle is gutted for this install. Caught in a pickle indeed!

Kirk

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Orion XTR375.2 repair/mods	807tubenut	Car Audio	0	27th December 2010 05:15 PM
Help with Orion amp repair	allorion	Car Audio	13	16th September 2010 11:06 PM
Repair Help on Orion 2500d	wccoug21	Car Audio	28	13th January 2010 03:25 AM
Orion 280GX amp repair	thegmann	Car Audio	11	11th April 2008 05:44 PM
Orion NT 200 vs Orion 2150 SX	Clipped	Car Audio	3	12th June 2007 01:55 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th March 2011, 12:22 PM	#1
AcuraTLSQ diyAudio Member Join Date: May 2009	Orion NT Repair Long shot but I thought I would ask to try to get an educated guess: Orion NT200 #1. Pops a fuse as soon as power is applied to the remote turn on lead. Does not pop the fuse when +/- only applied. Orion NT200 #2. Hissing noise from the power supply area of the board. Orion NT100. Hissing noise from the power supply area of the board. Both NT200's have buldging power supply caps. I do not have the proper input cables to test if the two hissing NT's play music or not. They are new to me and wanted to verify they would power on. Found the above. Long story short: Any ROUGH estimate on what it would cost to get these going to full spec and who is qualified with the time to do it right away? Proper cabling and termination is on the way and the vehicle is gutted for this install. Caught in a pickle indeed! Kirk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)