Old Kenwood KAC missing input cable

CarAudioSlave · 17th March 2011, 09:56 PM

I have an old Kenwood KAC that ive had laying around. Its missing both input connectors (audio and power) i pulled the old power input connector out and soldered a new setup. I am un aware of the pinout of this audio signal input plug or where i can even get one now days. ive tried ebay and such but havnt found anything.

any ideas where i can find a pinout for the plug or where to buy one? id prefer just making a new plug

thanks guys!

gisewhcs · 17th March 2011, 11:21 PM

Sorry, but what KAC do you have?
EVERY Kenwood amp starts with KAC, so your description is a bit inaccurate.

But the plug you are looking for is most probably called DIN-Plug.
I'm pretty sure Kenwood never changed the pinout, so look at the manual für a KAC-720 or similar.
They've had the pinout in their manual.

Regards
Julian

CarAudioSlave · 17th March 2011, 11:26 PM

aw i cant believe i didn't mention it was an 8020 model

Perry Babin · 18th March 2011, 04:24 AM

This is from a 9020.

RD: right channel signal
WT: left channel signal
OR: remote turn on
You can use a 5-pin din.

17th March 2011, 09:56 PM	#1
CarAudioSlave diyAudio Member Join Date: Mar 2011	Old Kenwood KAC missing input cable I have an old Kenwood KAC that ive had laying around. Its missing both input connectors (audio and power) i pulled the old power input connector out and soldered a new setup. I am un aware of the pinout of this audio signal input plug or where i can even get one now days. ive tried ebay and such but havnt found anything. any ideas where i can find a pinout for the plug or where to buy one? id prefer just making a new plug thanks guys!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenwood KAC 7202	mike49504	Car Audio	10	25th February 2011 11:05 PM
Kenwood KAC-X810D	mike49504	Car Audio	2	20th February 2010 01:49 PM
Kenwood KAC-8020 - Looking for DIN control cable	evilhomer	Parts	5	16th November 2007 06:53 PM
Kenwood KAC-X301T and KAC-X201T:Do they share the same board?	spooney	Car Audio	1	25th October 2007 01:08 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th March 2011, 11:21 PM	#2
gisewhcs diyAudio Member Join Date: Sep 2007	Sorry, but what KAC do you have? EVERY Kenwood amp starts with KAC, so your description is a bit inaccurate. But the plug you are looking for is most probably called DIN-Plug. I'm pretty sure Kenwood never changed the pinout, so look at the manual für a KAC-720 or similar. They've had the pinout in their manual. Regards Julian

17th March 2011, 11:26 PM	#3
CarAudioSlave diyAudio Member Join Date: Mar 2011	aw i cant believe i didn't mention it was an 8020 model

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)