pioneer cd player deh-p6300 no power

ian33 · 2nd February 2011, 01:37 AM

hi am workin on this cd player and its dead,when i press the eject button i can hear a beep but nothing on the screen,i change the output ic and resolder some bad connection but still the same. ideas or pointers whould be appreciated

thanks

Perry Babin · 2nd February 2011, 01:46 AM

The most common problem on the head units with the faces that fold down of flip around are the ribbon cables. If not one else has any experience with this problem, I'd suggest that you replace the ribbon cable.

I'm assuming that you've checked all of the fuses and have confirmed that you have both constant and switched voltage at the power plug where it plugs into the head unit, as well as a good ground.

ian33 · 2nd February 2011, 02:32 AM

that model dont carry a ribbon cable,i am getting 12v on the filter cap and output ic i have tested most of the parts apart from the smd parts which i can not even see what is mark on them if any one has the schematic email it to me please
ranks33@hotmail.com

Perry Babin · 2nd February 2011, 02:37 AM

What's the date on the label on the bottom of the head unit?

ian33 · 2nd February 2011, 02:43 AM

february 2001

Perry Babin · 2nd February 2011, 02:56 AM

That's the older one. There's a newer one also.

Do you have the service manual?

ian33 · 2nd February 2011, 02:59 AM

no

Perry Babin · 2nd February 2011, 03:00 AM

Email me and I'll send you what I have.

babin_perry@yahoo.com

ZippyTs · 2nd February 2011, 03:23 AM

In my deh-p980bt my screen went out once, came down to a 1ohm smd resistor on the main board. once you have the service manual backtrack the power for the faceplate and make sure its getting what it needs

2nd February 2011, 01:37 AM	#1
ian33 diyAudio Member Join Date: Jun 2010 Location: the caribbean	pioneer cd player deh-p6300 no power hi am workin on this cd player and its dead,when i press the eject button i can hear a beep but nothing on the screen,i change the output ic and resolder some bad connection but still the same. ideas or pointers whould be appreciated thanks

2nd February 2011, 01:46 AM	#2
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	The most common problem on the head units with the faces that fold down of flip around are the ribbon cables. If not one else has any experience with this problem, I'd suggest that you replace the ribbon cable. I'm assuming that you've checked all of the fuses and have confirmed that you have both constant and switched voltage at the power plug where it plugs into the head unit, as well as a good ground. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

2nd February 2011, 02:37 AM	#4
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	What's the date on the label on the bottom of the head unit? __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

2nd February 2011, 02:56 AM	#6
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	That's the older one. There's a newer one also. Do you have the service manual? __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

2nd February 2011, 03:00 AM	#8
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	Email me and I'll send you what I have. babin_perry@yahoo.com __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd February 2011, 02:32 AM	#3
ian33 diyAudio Member Join Date: Jun 2010 Location: the caribbean	that model dont carry a ribbon cable,i am getting 12v on the filter cap and output ic i have tested most of the parts apart from the smd parts which i can not even see what is mark on them if any one has the schematic email it to me please ranks33@hotmail.com

2nd February 2011, 02:43 AM	#5
ian33 diyAudio Member Join Date: Jun 2010 Location: the caribbean	february 2001

2nd February 2011, 02:59 AM	#7
ian33 diyAudio Member Join Date: Jun 2010 Location: the caribbean	no

2nd February 2011, 03:23 AM	#9
ZippyTs diyAudio Member Join Date: Oct 2009 Location: Sacramento, Ca	In my deh-p980bt my screen went out once, came down to a 1ohm smd resistor on the main board. once you have the service manual backtrack the power for the faceplate and make sure its getting what it needs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pioneer deh-p9400 cd eject problem	ppia600	Car Audio	0	9th April 2009 03:53 AM
Will a CD-I200 IP-Bus adapter work with Pioneer DEH-P860MP?	contentryder	Car Audio	4	5th April 2008 10:15 AM
Pioneer DEH-P6800MP vs DEH-P7800MP advice/thoughts	Yasek	Car Audio	1	7th November 2006 11:25 PM
Pioneer DEH p2600 and DEH p3500	pugmark	Car Audio	1	28th January 2005 06:47 AM
Pioneer DEH-P9200R Cd Eject Problem....HELP!!!	slizm	Car Audio	0	9th February 2004 10:51 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read