Are all of the components in the circuit?
I was mistaken. The anodes of DP10 and DP11 would read 0 ohms to pin 8 of the driver board.
Let's take this step by step...
With the black probe on the secondary center tap of the small transformer do you have approximately 24v on the anode of DA1 and the collector of QA3?
I was mistaken. The anodes of DP10 and DP11 would read 0 ohms to pin 8 of the driver board.
Let's take this step by step...
With the black probe on the secondary center tap of the small transformer do you have approximately 24v on the anode of DA1 and the collector of QA3?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Soundstream XXX6500