diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   Directed 1100 D (http://www.diyaudio.com/forums/car-audio/180903-directed-1100-d.html)

mike49504 11th January 2011 12:33 AM

Directed 1100 D
 
Got this amp in for repair Here what i have on the Regulators which are out of the amp .


7812
1-2:0.549
1-3:0.554
2-3:1.178

Probes reversed
1-2:OL
1-3:Ol
2-3:0.921

Defective?

7912
1-2:0.542
1-3:0.718
2-3:OL

Probes reversed
1-2:OL
1-3:OL
2-3:0.540

Perry Babin 11th January 2011 02:02 AM

Except for shorted regulators, it's difficult to determine whether they're defective or not with a meter because the internal circuits differ from one manufacturer to another. I always check them in the circuit.

mike49504 11th January 2011 03:59 AM

Ok my brain isnt working tonight.

IRFP9640 Is on the positive rail?

Perry Babin 11th January 2011 12:42 PM

If the center legs of the outputs are directly connected, the 9640 is on the positive rail.

mike49504 11th January 2011 02:19 PM

This amp takes 14 outputs total. I believe 6 of them are 640's and the other 8 are 9640's .

The center legs are connected on all 7 of them on each side so the 9640's would be the positive rail?

Just wanna make sure since someone worked on this before and had 8 640's and 6 9640's and the amp had full rail voltage on the outputs

Perry Babin 11th January 2011 02:54 PM

That's correct.

mike49504 11th January 2011 03:37 PM

I put all new outputs in the amp. Amp powers up and idle's perfectly . But i have 63 volts of dc on the outputs any ideas?

Perry Babin 11th January 2011 03:48 PM

+63 or -63?

Post the DC voltage on all of the pins of the B52 IC.


Pin 1:
Pin 2:
Pin 3:
Pin 4:
Pin 5:
Pin 6:
Pin 7:
Pin 8:
Pin 9:
Pin 10:
Pin 11:
Pin 12:
Pin 13:
Pin 14:

mike49504 11th January 2011 04:00 PM

Positive voltage (63.4 volts)


B52
1:6.46
2:0
3:3.55
4:-3.16
5:0
6:-4.32
7:0
8:-2.30
9:-3.61
10:-4.12
11:-2.50
12:0
13:-2.30
14:-2.33

Perry Babin 11th January 2011 04:15 PM

Are the 15v regs working properly. 1 and 6 should have 15.


All times are GMT. The time now is 09:00 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2