Hi,
Does anyone know where I can get a replacement gain pot for a T20001BD. Im not sure of the designator. Im not sure if its bad or just needs cleaned, because it scatches and pops turned back and forth. It also pops when you push in on the pot, Solder joints look ok, but may need a closer inspection from me. Maybe I can blow it out with some canned air then spray some deoxit onto it.
Thanks
Does anyone know where I can get a replacement gain pot for a T20001BD. Im not sure of the designator. Im not sure if its bad or just needs cleaned, because it scatches and pops turned back and forth. It also pops when you push in on the pot, Solder joints look ok, but may need a closer inspection from me. Maybe I can blow it out with some canned air then spray some deoxit onto it.
Thanks
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.