diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   Gain Pot RF T20001BD (http://www.diyaudio.com/forums/car-audio/178272-gain-pot-rf-t20001bd.html)

vypr 1st December 2010 09:56 AM

Gain Pot RF T20001BD
 
Hi,

Does anyone know where I can get a replacement gain pot for a T20001BD. Im not sure of the designator. Im not sure if its bad or just needs cleaned, because it scatches and pops turned back and forth. It also pops when you push in on the pot, Solder joints look ok, but may need a closer inspection from me. Maybe I can blow it out with some canned air then spray some deoxit onto it.

Thanks

Perry Babin 1st December 2010 08:34 PM

If the deoxit doesn't clean it sufficiently, call PacParts to get a replacement. Have the board in front of you. They'll likely want the board number, the model and the circuit board designation.


All times are GMT. The time now is 07:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2