kicker zr 1000 (module?)

[ernie cosillos]

any one out there know if i need a module for the kicker zr 1000? i have this amp just lying around and i don't know if it works. it doesn't have a module the slot is empty. does this not allow it to turn on?

[Perry Babin]

The amp would turn on without the module but no sound would play through unless the module was bypassed with jumper wires.

[ernie cosillos]

so the amp would in fact power up but no sound? how would i be able to use the amp or install the jumper wires?

[Perry Babin]

Yes. It would power up but would not produce any audio.

You can use it without the module if you jump the pins on the riser board as shown in the attached photo.

[chipper]

I have three of the crossover modules that I will mostlikely never use because I don't own kicker ZR amps.

[Perry Babin]

If you sell those modules, you should have an agreement with the seller that you're not responsible for damage that may occur to the amp if the module is defective. Many of the modules have defective surface mount capacitors and will cause an amp to fail. The module may work in some modes (HP, LP, full range) but not in others.

[chipper]

[QUOTE=Perry Babin;2338503]If you sell those modules, you should have an agreement with the seller that you're not responsible for damage that may occur to the amp if the module is defective. Many of the modules have defective surface mount capacitors and will cause an amp to fail. The module may work in some modes (HP, LP, full range) but not in others.[/QU

I do agree with you on that, I have not used these for awhile since I had a zr120. The ones I have are SWX, ZRX, AMR (mid range).

[ernie cosillos]

Hey there, thankyou for the diagram on how to properly jump the crossover riser board. unfortunately i could barely tell whats what, is there a way you can send me a better pic? thanks

[ernie cosillos]

i would need the lp crossover module how much would you be willing to take for one?

[Perry Babin]

Click on the image to view it full size.