DIY line driver - Page 3

djQUAN · 24th October 2010, 01:58 PM

changed to Panasonic FM powersupply caps

and Burr Brown high current op amps

also cut the board in two for easy tweaking of powersupply

djQUAN · 26th November 2010, 03:48 PM

upping the thread. I got the cam and took pics of the 8 channel version and the new RCA connectors.

this unit is for a customer.

it used NE5532 on the other half because it is only needed for the clip indicator. customer is not going full balanced so there's no need to use BB on that side.

The maker of the case messed up on the silkscreen print. gonna fix that on the next batch.

MANiacal · 31st December 2011, 03:48 PM

I'd love to get some pricing information on these units. I am currently running a Bit-one and an Audiocontrol Matrix along with a JL Audio CL-RLC. One 8 channel line driver would be so much more convenient. Plus, with the gain on individual channels, these can be much more versatile.

speaker · 1st January 2012, 04:57 PM

Kudos djQUAN, I'd thought the enthusiast spirit was dead in car audio.

My faith is restored!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Line Driver	SQ ABSOLUTE	Car Audio	15	4th September 2009 10:25 PM
DIY Line Array for Pa system - Driver Selection	woodrowman	Full Range	1	20th May 2008 10:58 PM
Line driver?	audiobahnkid592	Car Audio	7	15th August 2007 12:23 PM
Sub Line Driver	rampage101	Car Audio	9	18th October 2006 06:39 AM
t-line subs for a DIY line array	tom1356	Multi-Way	17	28th December 2002 12:15 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th October 2010, 01:58 PM	#21
djQUAN diyAudio Member Join Date: May 2004 Location: manila	changed to Panasonic FM powersupply caps and Burr Brown high current op amps also cut the board in two for easy tweaking of powersupply

26th November 2010, 03:48 PM	#22
djQUAN diyAudio Member Join Date: May 2004 Location: manila	upping the thread. I got the cam and took pics of the 8 channel version and the new RCA connectors. this unit is for a customer. it used NE5532 on the other half because it is only needed for the clip indicator. customer is not going full balanced so there's no need to use BB on that side. The maker of the case messed up on the silkscreen print. gonna fix that on the next batch.

31st December 2011, 03:48 PM	#23
MANiacal diyAudio Member Join Date: Dec 2011	I'd love to get some pricing information on these units. I am currently running a Bit-one and an Audiocontrol Matrix along with a JL Audio CL-RLC. One 8 channel line driver would be so much more convenient. Plus, with the gain on individual channels, these can be much more versatile.

1st January 2012, 04:57 PM	#24
speaker diyAudio Member Join Date: Mar 2004 Location: USA	Kudos djQUAN, I'd thought the enthusiast spirit was dead in car audio. My faith is restored!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)