Go Back   Home > Forums > General Interest > Car Audio
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th September 2010, 02:49 PM   #1
diyAudio Member
 
Join Date: Sep 2010
Default DEX-P99RS review

anyone have exprience with the Pioneer DEX-P99RS

I need review of the HU and how it sound in compare to the P9, ODR,
HX-D2 and F1status?

Thanks
  Reply With Quote
Old 28th September 2010, 03:57 PM   #2
diyAudio Member
 
Join Date: Feb 2004
Location: Los Angeles
The most sophisticated of all that stuff was the F#1Status PROCESSOR due to the time-domain EQ built in. I forget what it was called, but it could actually improve phase problems and improve the sound that way. The D/A conversion for that product series was second to none, at least on a measured basis.

What are you looking for? What kind of vehicle? What's your budget? What kinds of music do you listen to, and how loud?
--> What sort of SYSTEM do you have in mind to build?
That may influence the answer for your particular case.
  Reply With Quote
Old 30th September 2010, 01:24 AM   #3
jol50 is offline jol50  United States
diyAudio Member
 
Join Date: Nov 2007
Comments I saw were positive except the price and some don't like the controls because they simplified the face so much. I have the similar 880PRS, the 99 has four sets of outputs instead of three and a 31 band EQ over my 16 band. Seems like a lot for a bigger chip inside, but that is the way it goes. It is all DSP processing far as I know, I doubt there is an issue with sound quality. All channels have TA and the EQ is separate left and right if I recall correctly just like mine is. Mine sounds great long as you don't blow the pico fuse, but on tones it will get funky if you crank the EQ up over 3dB....but you don't seem to hear it on music. So I'm trying to change my system to minimize EQ, it started out I just tossed in what I had laying around but this is something I would do anyway. The real advantage is it being an all in one unit with no outboard processors or double DIN/etc other stuff to mount or fiddle with. You do have to get into menus for all of it but its not that hard. I still would rather an analog simplified EQ/levels because I can change them without even looking at them on the road, but what do you do. You can leave it on one setting like EQ or sub level and two clicks you are into that setting.
  Reply With Quote

Reply


Hide this!Advertise here!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
wanted. pioneer dex-m400 (rds) zacoo33 Swap Meet 2 9th December 2010 05:44 AM
Pioneer Dex 77 radio wanted dead or alive looneytuner Swap Meet 1 16th May 2010 06:46 AM
owners' manual pioneer dex-p1 / r prakersa Car Audio 9 11th September 2008 12:43 PM
Pioneer DEX-P9 Help shagone Car Audio 4 11th April 2008 09:59 PM
pioneer DEX-77 enfield48j Car Audio 1 25th March 2005 08:11 PM


New To Site? Need Help?

All times are GMT. The time now is 09:05 PM.

Page generated in 0.07749 seconds (72.21% PHP - 27.79% MySQL) with 10 queries

Copyright ©1999-2012 diyAudio