I have this amp in for repair.
When powering it up it draws excessive current . So i checked the outputs and found 1 to be shorted.
I replaced the outputs and tryed powering it up same thing . So i replaced the drivers in the amp.
Same thing it will draw excessive current. If i remove 4 of the outputs that get warm when trying to power it up the amp will come on and idle perfect.
The outputs test fine.
Any ideas?
When powering it up it draws excessive current . So i checked the outputs and found 1 to be shorted.
I replaced the outputs and tryed powering it up same thing . So i replaced the drivers in the amp.
Same thing it will draw excessive current. If i remove 4 of the outputs that get warm when trying to power it up the amp will come on and idle perfect.
The outputs test fine.
Any ideas?
Ill get pics up in a lil bit .
I removed the 2 outputs that get warm the amp will power up then.
Heres the reading i get on the outputs In diode check.
Tip36C
1-2:0.536
1-3:0.539
2-3:OL
Reverse probes
1-2:OL
1-3:OL
2-3:OL
Tip35C
1-2:OL
1-3:OL
2-3:OL
Reverse probes
1-2:0.536
1-3:0.538
2-3:OL
To me it appears the outputs are good.
I removed the 2 outputs that get warm the amp will power up then.
Heres the reading i get on the outputs In diode check.
Tip36C
1-2:0.536
1-3:0.539
2-3:OL
Reverse probes
1-2:OL
1-3:OL
2-3:OL
Tip35C
1-2:OL
1-3:OL
2-3:OL
Reverse probes
1-2:0.536
1-3:0.538
2-3:OL
To me it appears the outputs are good.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Directed 650