amplifier turns on and power light dims wen bass (would hit) but no sound is coming from it n e 1 have an idea how to fix it? ive took it apart and soldered some things that were a bit burnt and thats how i got the power light to now dim with the music but still no sound....... c oiuld it be a problem with the speaker output connections directly or something more advanced like diodes and transistors???
well ive tried a few different subs and the same thing happens with it each time... wen i first received the amp it did absolutely nothing but power on, and so i took it apart and found a couple burnt spots then re-soldered them, now it seems like a normal operating amp but no sound comes out.... ive tried tapping the inputs with a small screwdriver to c if maybe the inputs were messed up but the power light dims as if i were putting music through it like various amps ive had where the power light will dim synchronized with the beat... wat should i check for next??? n e ideas?
not sure wat was burned but it fixed the amp to where the light dims wen the bass was going thru it just no sound actualy coming out....
and if u turn on an amp and tap a small screwdriver or something metal into the center of an audio input jack it will thump in the subwoofer
and if u turn on an amp and tap a small screwdriver or something metal into the center of an audio input jack it will thump in the subwoofer
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.