earthquake audio T 2000W/D1 quality or not?

[Ground Zero]

Hello

I have seen an amplifier earthquake T 2000W/D1 to replace my "sinuslive sla1500v1 "

so i would like to have your advice please, about this amplifier is it a good product with sound quality or not?

this is the caracteristics:

Nombre de canaux : 1 / Mono block
Max Power output: 2000 Watts
RMS Power 4-Ohm Bridged: N/A
RMS Power 2-Ohm: 1 x 1000 Watts RMS
RMS Power 4-ohm stereo: N/A
Damping Factor: >800
Cross over slopes: 24dB/OCT
THD: >0.005
SNR: 104dB
Class: D
Speaker Connection: 8 Gauge
Power Connection: 4 Gauge
Input Type: High Level and Low Level RCA
Dimension: 2.31" x 9.75" x 13.3125 Number of channels: 1 / MONO Block

Thanks in advance

 

[Perry Babin]

Unless someone has direct experience with them, it's going to be difficult to judge the quality/reliability. A photo of the inside would help if you could find one. If it's a clone of another amp, experience with the other clones would be a reasonable indicator of what you could expect from this amp.

 

[Ground Zero]

Hello

Thanks Perry

I think to keep this amp in mind and i'll try to search for other brand

maybe an helix amplifier or digital design or boston acoustics

for the helix i've seen the splx 1000 and boston acoustics the GT28

the helix is a mono classD and the boston has a 2 output that i can bridge.

do you think they are good product?

Thanks in advance.

 

[Ground Zero]

and there is also a DLS amplifier the CAD15
Performance CAD15 - 1,6 kilowatt class D

in fact i would like to have the best sound with quality

I hesitate with helix, boston acoustics and DLS

If you can help me please?
Thanks

 

[Perry Babin]

I'm sorry but I have no experience with any of these amplifiers. Maybe someone else can help.

 

[Ground Zero]

no problem Perry