diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   what scope to repair car amp ? (http://www.diyaudio.com/forums/car-audio/167740-what-scope-repair-car-amp.html)

Ground Zero 30th May 2010 07:28 PM

what scope to repair car amp ?
 
Hello everybody

I would like that you help choose a good scope to repair easily a car amplifier please

I'm not rich :( so i've seen that

Oscilloscope manuel HPS 10 sur CONRAD, Multimètres graphiques, Multimètres

Oscilloscope 610/2 10 MHz sur CONRAD, Oscilloscopes monocanaux analogiques, Oscilloscopes

for security i don't want product already used because i'm newbie :o

So can you tell me if they are ok for repairing car amp please ? and what i must in the technical caractéristique to have a good scope ?

Thanks a lot in advance
:)

Perry Babin 30th May 2010 08:04 PM

I would choose the CRT based scope. It will have a much better resolution and will make it easier to see distortion and glitches.

Ground Zero 30th May 2010 08:11 PM

Thanks Perry

WHen you talk about crt scope do you talk of this scope ?

Oscilloscope 610/2 10 MHz sur CONRAD, Oscilloscopes monocanaux analogiques, Oscilloscopes


if yes ? it will be ok to repair car amp? because it's the less expensive and i don't know if it's good for what i need :confused:

Thanks a lot for your confirmation :)

Perry Babin 30th May 2010 08:13 PM

Yes. That's the CRT based scope. If it's in good working order and can meet the 10MHz spec, it's good enough.

Ground Zero 30th May 2010 08:19 PM

Thanks a lot Perry

You are a great person !

sincerely i Thank you for your help from the beginning

Ground Zero 8th June 2010 07:14 PM

Hello Perry

I will buy a scope to repair the sinuslive amp because i can't buy other amp for the moment :(

this is the scope Perry

Oscilloscope 610/2 10 MHz sur CONRAD, Oscilloscopes monocanaux analogiques, Oscilloscopes

but in the french manual they say:

""The measurement can be performed in circuits that, by design, not
can generate more than 6 amps.""

are you sure that scope is good fo repairing car audio amplifier Perry?

the english manual in english in pdf file

http://www1.produktinfo.conrad.com/d...RAFT_AO610.pdf

Can you confirm me please, this scope is good for repairing amp Perry

because if it's good i buy it :)
but could you help me to use it please ?:o

Thanks in advance :)

Perry Babin 8th June 2010 07:27 PM

I can't find that statement in the english version. Find it and post the page where you find it.

Ground Zero 8th June 2010 07:47 PM

this is the french version of the manual and i have translate in english this information.

it's at page 2 of the manual in: Domaine d’application

• La mesure ne peut être effectuée que dans des circuits qui, de par leur conception, ne
peuvent générer plus de 6 ampères.
• Une utilisation autre que celle décrite dans la présente notice est interdite !

http://www1.produktinfo.conrad.com/d...-oscillosc.pdf

Perry Babin 8th June 2010 08:05 PM

It may be a misprint. No more than a few microamps is passed through the scope. I don't want you to buy it based on what I tell you. I can't see any reason it won't be a perfectly good choice but I've never used that model scope.

Contact the seller. They should be able to definitively answer your questions.

Ground Zero 8th June 2010 09:19 PM

I have difficulties to contact them :(

I don\'t know what to do :bawling:


All times are GMT. The time now is 04:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2