|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Mar 2004
Location: Heidelberg
|
Does anyone have a KAC-1023 Service manual ?
Thx , sdoom |
|
|
|
#2 |
|
diyAudio Member
Join Date: Sep 2009
|
Vielleich hier:
http://www.eserviceinfo.com/index.php dort nach KAC suchen, oder Kenwood der DL-Linl ist etwas versteckt, aber die Seite ist gut bestückt |
|
|
|
#3 |
|
diyAudio Member
Join Date: Jun 2007
Location: Louis y ana
|
Very nice amp, hope you get it running well
__________________
Don't worry... you can always turn the gain down! |
|
|
|
#4 |
|
diyAudio Member
Join Date: Mar 2004
Location: Heidelberg
|
Yes got the baby running again
![]() defective parts: -flat cable (connecting the small low pass filter sub board to the main board) -both protection relays fried internally - 3 small thinn lines on the RCA / preamp board broken -4 large DC/DC capacitors out off tolerance (~4300µF instead of 5600µF) - 2 small capacitors leaking (could smell the bad stuff during resoldering) and as always a large number of "cold" solder joints Way of fixing. - Resoldered all boards (power parts were resoldered using "silver" tin-solder (has a higher solder temp) - checked major caps with a cap. meter - followed the input signal (sine generator) through all sections finding the broken curcuit lines and the faulty relays and that damn flat cable. I guess the amp gets too hot inside for some parts although the amp has two small fans. |
|
|
|
#5 |
|
diyAudio Member
Join Date: Mar 2005
|
The best stereo in my opinion
__________________
Projector bulbs, burners, lamps, reflectors and ballasts |
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Kenwood DP-7090 Service Manual | ds23man | Digital Source | 1 | 20th September 2012 03:10 AM |
| need Kenwood KA-990EX service manual | tino96 | Solid State | 21 | 11th November 2010 01:11 PM |
| Kenwood KR-5600 Service Manual | hga | Solid State | 1 | 8th July 2009 09:23 PM |
| Kenwood KA-7100 service manual | warpig | Solid State | 6 | 25th June 2009 02:33 AM |
| kenwood KAF-3030R service manual | Ipanema | Solid State | 4 | 23rd February 2005 02:30 AM |
| New To Site? | Need Help? |