Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

car audio: i like my stock speaker better???
car audio: i like my stock speaker better???
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th August 2009, 02:59 PM   #1
kslim is offline kslim  United States
diyAudio Member
 
Join Date: Dec 2003
Location: Irvine, CA
Default car audio: i like my stock speaker better???

I installed a 6.5 componenet sets(PPI 356c). I saw a good improvement upto the point where I installed crossover and tweeter. So the tweeters and stock woofers with crossover sounded pretty good.

Now after I replaced stock woofer with 365cs' woofer, it sounds too bright. It is just too bright. Could it be installation(I used plastic spacer ring while stock woofers do not need spacer ring because they dont have big magnets) ? or just these new woofers are bright in natures? Any thoughts?
  Reply With Quote
Old 15th August 2009, 03:21 PM   #2
Cal Weldon is offline Cal Weldon  Canada
Speakerholic
diyAudio Moderator
 
Cal Weldon's Avatar
 
Join Date: Jan 2004
Location: Near Vancouver
car audio: i like my stock speaker better???
The stock woofers are likely to have a higher q value meaning they sound like they have more bass because it is not as controlled as the larger magnet speaker. The larger magnet unit may be happier in a smaller enclosure and if that's not possible, you may have to add bass by EQing it.
__________________
planet10 needs your help:
Let's help Ruth and Dave
  Reply With Quote
Old 15th August 2009, 09:21 PM   #3
Glowbug is offline Glowbug  United States
diyAudio Member
 
Glowbug's Avatar
 
Join Date: Feb 2006
Location: Hillsborough, NC
Default Re: car audio: i like my stock speaker better???

Quote:
Originally posted by kslim
I installed a 6.5 componenet sets(PPI 356c). I saw a good improvement upto the point where I installed crossover and tweeter. So the tweeters and stock woofers with crossover sounded pretty good.

Now after I replaced stock woofer with 365cs' woofer, it sounds too bright. It is just too bright. Could it be installation(I used plastic spacer ring while stock woofers do not need spacer ring because they dont have big magnets) ? or just these new woofers are bright in natures? Any thoughts?
I assume you're running them off head unit power?

Running them off of a small amp, even 40Wx2 or so, would make a drastic difference And then covering up large holes in the door panel and laying down sound deadening mat would be even better for improving midbass response.
  Reply With Quote
Old 15th August 2009, 11:23 PM   #4
BHTX is offline BHTX  United States
diyAudio Member
 
BHTX's Avatar
 
Join Date: Feb 2006
I've found this is often the case, especially when running aftermarket car speakers without a separate amplifier, particularly when running them off the factory head unit. The stock speakers are cheap, have small magnets, and are less efficient (as Cal mentioned). Comparing them to an aftermarket loudspeaker might make your new speakers sound bright and bass shy. EQ should help.

Edit: This is part of the reason why I'll no longer buy car speakers for cars, but instead go the more DIY approach and pick individual drivers based on performance/specifications/price/etc, just like I would any other audio project. Aside from quality concerns, car audio manufacturers often don't provide enough information (not to mention response graphs and such). When installing small woofers in doors, I'll usually use a driver with a Qts around .5 (weaker motor, so they're cheaper, too), and sometimes as high as .7 or more if they're going to be used without a subwoofer.
  Reply With Quote
Old 16th August 2009, 02:33 AM   #5
MisterTwister is offline MisterTwister  Tibet
diyAudio Member
 
Join Date: Feb 2006
Location: usa
sometimes stock drivers are of surprisingly good quality.
speakers I pulled out of honda accord had copper sleeves on their pole pieces!
  Reply With Quote
Old 16th August 2009, 03:00 AM   #6
Wavebourn is offline Wavebourn  United States
Designer & Technologist
diyAudio Member
 
Wavebourn's Avatar
 
Join Date: Sep 2006
Location: Pleasant Hill, CA
car audio: i like my stock speaker better???
In Toyota Prius that my father in law recently totaled I glued linoleum to all metal surfaces in doors, and put some Memory Foam inside. I used Infinity Reference 6002 speakers there, they sounded well enough, compared to stock ones. Also, I had to put some linoleum tiles under all rugs to silence the bottom of the car.
__________________
Nothing in the universe is perfect. The ideal things are the ones that are most optimal. Optimization criteria, what matters. When I hear "No Compromise Design", I want to take a sledgehammer and test how impact-proof it is.
  Reply With Quote

Reply


car audio: i like my stock speaker better???Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


New To Site? Need Help?

All times are GMT. The time now is 03:12 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki