Need output chokes for power acoustick a2400db - Page 2 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd September 2009, 04:53 PM   #11
diyAudio Member
 
Join Date: Mar 2007
Location: Columbus, Ohio ^
ppia600,

Just curious how your hand wound chokes worked out, did you ever test it out in the car under heavy loading? Hopefully it worked out for you. Again I was just curious how it went. Pioneer621
  Reply With Quote
Old 4th September 2009, 01:43 AM   #12
ppia600 is offline ppia600  United States
diyAudio Member
 
Join Date: Jun 2007
Location: Louis y ana
Unfortunately I haven't been able to use it in the car yet, because I sold my subs. I haven't decided on where the new subs will be located - in the cabin or trunk, so until I can convince a friend to let me borrow some subs the amp has to wait. I also had to cut the bottom cover and will need to build a spacer for the outer edge of the sink because the coil windings were too close to the bottom cover. I'll update this thread asap
__________________
Don't worry... you can always turn the gain down!

Last edited by ppia600; 4th September 2009 at 01:46 AM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chokes next to output transformers? Rob11966 Tubes / Valves 3 7th January 2009 08:18 PM
Power Acoustik A2400db spooney Car Audio 21 19th March 2008 12:05 AM
Plate chokes & Power chokes JC951t Tubes / Valves 3 19th October 2006 03:18 PM
Parallelling power supply chokes??? Klimon Tubes / Valves 4 18th May 2005 07:46 PM
chokes and power supplies Steve-O-Rama Tubes / Valves 2 11th November 2004 07:47 PM


New To Site? Need Help?

All times are GMT. The time now is 06:04 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2