mosfet clips for phase linear amps..

marko · 23rd May 2009, 08:47 PM

does anyone know where i can get the small clips that hold the fets to the sink on the old modular/0.4/6/8 etc..?

anyone who knows these amps will also know the clips were a design fault and earlier clips literally fell out and snapped!!

will post a pic tomorrow!

marko · 24th May 2009, 09:51 AM

pic as promised, the black ones are the later improved versions, the bare metal ones are the old ones that also rust with heat then simply fall out!

marko · 19th July 2009, 08:08 AM

is no one able to help? i need 100's of these little things as they've all failed in the amps i have...

dynosaur · 26th July 2009, 07:54 AM

ever thought about trust worthy ol screw's and insulators ? sad that manufacturing cost have gotten to the point they are too darn CHEAP to give us reliable products anymore? if you can get them in the case.

marko · 26th July 2009, 08:05 AM

yes i have but this is the problem i have...

they are so damn hard to get into do anything, someone somewhere must know of some as it was a BIG fault with all the pl amps of that era, it's just finding that source....

marko · 2nd August 2009, 12:20 PM

anyone able to help or make other suggestions as to how i can get the fets on to the heatsink efficiantly?

23rd May 2009, 08:47 PM	#1
marko diyAudio Member Join Date: May 2004 Location: donnyuk	mosfet clips for phase linear amps.. does anyone know where i can get the small clips that hold the fets to the sink on the old modular/0.4/6/8 etc..? anyone who knows these amps will also know the clips were a design fault and earlier clips literally fell out and snapped!! will post a pic tomorrow!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phase Linear 400, SERIOUS AC!	Planerguy	Solid State	41	29th March 2009 02:41 AM
1000A ICEpower amps (Full Linear Amps)	nautilus	Swap Meet	10	18th December 2007 11:31 PM
WTB Phase Linear amps	d3imlay	Swap Meet	0	1st December 2006 07:58 AM
Phase Linear	lumanauw	Pass Labs	3	17th December 2005 02:38 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th July 2009, 08:08 AM	#3
marko diyAudio Member Join Date: May 2004 Location: donnyuk	is no one able to help? i need 100's of these little things as they've all failed in the amps i have...

26th July 2009, 07:54 AM	#4
dynosaur diyAudio Member Join Date: Sep 2006	ever thought about trust worthy ol screw's and insulators ? sad that manufacturing cost have gotten to the point they are too darn CHEAP to give us reliable products anymore? if you can get them in the case.

26th July 2009, 08:05 AM	#5
marko diyAudio Member Join Date: May 2004 Location: donnyuk	yes i have but this is the problem i have... they are so damn hard to get into do anything, someone somewhere must know of some as it was a BIG fault with all the pl amps of that era, it's just finding that source....

2nd August 2009, 12:20 PM	#6
marko diyAudio Member Join Date: May 2004 Location: donnyuk	anyone able to help or make other suggestions as to how i can get the fets on to the heatsink efficiantly?