Need Part ID on Punch 150 (old style)

[Scanlines]

Hi;

I've got an older Punch 150 here that has popped an electro cap.

There is no remaining artifact of the cap to tell what the value was.

Ampguts seems to only have the newer Punch models displayed.

Here's some pics of the amp board.

I don't know if anyone has this model in their posession but I
Apreciate any help in IDing this part.
Thanks

[Scanlines]

Here's a pic of the whole board.

[Perry Babin]

I think it's a 10uF@50v. The one next to it should be the same value. You can look at the other channel to confirm. You should also be able to get the schematic from Rockford (P150, rev K, most likely) but looking at the other channel would be easier.