Do not operate the amp without the cover in place.
Have you checked the output transistors to see if any are shorted?
The outputs are the ones with their 3rd legs connected to the large resistors. You should not read anything near 0 ohms between any of the legs of any individual transistor.
Have you checked the output transistors to see if any are shorted?
The outputs are the ones with their 3rd legs connected to the large resistors. You should not read anything near 0 ohms between any of the legs of any individual transistor.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.