mtx 300xd help

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I recently bought a MTX 300xd Amp but it doesnt put out any sound.

I have oppened it up, doesnt look to be any burn marks, or anything of that sort. So i pull all the mosfets off, and the rectifier. Tested them all, and they all check out.

Not to sure of any history on the amp. any suggestions would be greatly appreciated.

Thanks
 
here is a photo of the amp, i will also send one to the email you provided.

I didnt check the voltages, where would i check them from?

Also i dont know if it would matter but im kinda of using a micky mouse set up. I bought a ac-dc converter, but its only rated at 8.5 amps.

My thinking is that it SHOULD work, as im not looking to produce large amounts of sound. Just so that i know if its functioning.

Also just off to the right of D3 there are exposed copper tracings, NOT sure if that would be a problem

An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.