ads 860mx

mike49504 · 5th September 2008, 06:14 PM

im working on an ads amp and checked the powersupply fets 1 of the 4 fets was shorted the smp6n06's is what they used i checked the diodes and resistors and they all seem fine wondering do i need to check anything else before i stick the new fets in and power it up also checked all outputs and they seem to be fine

1moreamp · 5th September 2008, 07:07 PM

SMP60N06 would be more like it. Just about any general purpose 60 amp or higher fet will work just fine.

Diodes, and outputs would be my first checkouts also, until you can get it fired up...

5th September 2008, 06:14 PM	#1
mike49504 diyAudio Member Join Date: Sep 2006	ads 860mx im working on an ads amp and checked the powersupply fets 1 of the 4 fets was shorted the smp6n06's is what they used i checked the diodes and resistors and they all seem fine wondering do i need to check anything else before i stick the new fets in and power it up also checked all outputs and they seem to be fine

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ads 860mx	mike49504	Car Audio	8	8th October 2008 08:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th September 2008, 07:07 PM	#2
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	SMP60N06 would be more like it. Just about any general purpose 60 amp or higher fet will work just fine. Diodes, and outputs would be my first checkouts also, until you can get it fired up...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)