ads amp question

mike49504 · 28th August 2008, 05:11 PM

I bought an ads amp online and someone hacked the thing up im wondering if anyone knows where i might be able to get the pins that solder to the circuit bord for the speaker leads out its an older amp it has the pins solderd to the board and it has thoose speaker plugs but someone cut the pins out and solderd speaker wire to the board so wondering if anyone knows where i can buy new pins any help would greatly be appericated thanks

1moreamp · 28th August 2008, 09:20 PM

Do you mean the large gold WECO pins or the smaller plastic pins assemblies like on the multi-channel amps??? a model number or a pic would be most helpful...

mike49504 · 29th August 2008, 04:41 AM

the amp is an ads mx860 heres a pic of the amp any help would greatly be appericated

1moreamp · 29th August 2008, 06:06 AM

I uploaded you pic. They look like smaller versions of the power pins ? am I correct? If so I might have a few in gold plate sitting in a 4 channel PPI carcass I have...LMK

mike49504 · 29th August 2008, 06:29 PM

hi thanks for getting back to me yes they are a smaller verison of the power pins i need a total of 8 pins wondering if you would sell me some if u have any extras and how much do u want for them i appericate the help thanks

1moreamp · 30th August 2008, 05:36 AM

Go ahead and pm/email me. I will be back on Tuesday and I am pretty sure I have 8 of them on a dead PPI-404 in my junk room. They were made by WECO and they are similar on old infinity, old PPI, and of course ADS.
I know I have a infinity also 5 channel, so somewhere between the two I think I can get a set together for you.
Your gonna need the mating plugs next there about 10 to 15 bucks on flea-bay...

1moreamp · 9th September 2008, 04:03 PM

I have collected 9 pins for you, but you did not answer my return e-mail??? LMK if you need these or not.....

28th August 2008, 05:11 PM	#1
mike49504 diyAudio Member Join Date: Sep 2006	ads amp question I bought an ads amp online and someone hacked the thing up im wondering if anyone knows where i might be able to get the pins that solder to the circuit bord for the speaker leads out its an older amp it has the pins solderd to the board and it has thoose speaker plugs but someone cut the pins out and solderd speaker wire to the board so wondering if anyone knows where i can buy new pins any help would greatly be appericated thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
newbie with input tran. question and wiring question	imo	Solid State	0	18th January 2006 10:10 PM
Capacitor Question /question on cap	TunaFish	Tubes / Valves	14	12th January 2004 02:23 AM
PS question - tformer question actually	breguetphile	Chip Amps	2	30th May 2003 01:29 PM
old speaker question, bullet midrange question & link to speaker project	wallijonn	Multi-Way	10	5th November 2002 06:03 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th August 2008, 09:20 PM	#2
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	Do you mean the large gold WECO pins or the smaller plastic pins assemblies like on the multi-channel amps??? a model number or a pic would be most helpful...

29th August 2008, 06:06 AM	#4
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	I uploaded you pic. They look like smaller versions of the power pins ? am I correct? If so I might have a few in gold plate sitting in a 4 channel PPI carcass I have...LMK

29th August 2008, 06:29 PM	#5
mike49504 diyAudio Member Join Date: Sep 2006	hi thanks for getting back to me yes they are a smaller verison of the power pins i need a total of 8 pins wondering if you would sell me some if u have any extras and how much do u want for them i appericate the help thanks

30th August 2008, 05:36 AM	#6
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	Go ahead and pm/email me. I will be back on Tuesday and I am pretty sure I have 8 of them on a dead PPI-404 in my junk room. They were made by WECO and they are similar on old infinity, old PPI, and of course ADS. I know I have a infinity also 5 channel, so somewhere between the two I think I can get a set together for you. Your gonna need the mating plugs next there about 10 to 15 bucks on flea-bay...

9th September 2008, 04:03 PM	#7
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	I have collected 9 pins for you, but you did not answer my return e-mail??? LMK if you need these or not.....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)