|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th August 2008, 05:26 PM
|
#1 |
|
diyAudio Member
Join Date: Mar 2008
|
orion 2250,2100,Concept 97 modd issues
I readily know that all 3 amps are based on the same design.And that the power supply issues exist trying to go from a high current power supply design to a high voltage design.I am trying to modd a 2250sx to a high current design (2100HCCA or Concept 97). Any info would be helpfull.
|
|
|
12th August 2008, 08:04 PM
|
#2 |
|
diyAudio Member
Join Date: Nov 2003
Location: Louisiana
|
Transformer ratio
Zener diodes for power supply regulation Resistors near center of audio section 220 ohms >> 150 ohms The 97.3 is rated to go down to low impedances but the one I worked on had rail voltage similar to that of a 2250. At low impedances, it would have failed very quickly.
__________________
Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone one with a heatsink for Orion 2250/2100 | amc32 | Car Audio | 0 | 20th August 2009 08:04 PM |
| About to pull my hair out! Working on ORION 2250 | Samuel Rock | Car Audio | 9 | 24th December 2008 02:13 PM |
| Orion XTR 2250, current hungry ? | Scanlines | Car Audio | 4 | 16th December 2008 12:55 PM |
| Orion 2250 sx cap Identification? | shallowfu | Car Audio | 4 | 21st April 2007 04:59 AM |
| Orion 2100 Or 2250 Ohm Ques. | shallowfu | Car Audio | 31 | 24th September 2006 09:48 AM |
| New To Site? | Need Help? |
| Page generated in 0.07156 seconds (66.58% PHP - 33.42% MySQL) with 10 queries |
