MTX resistor Thunder 4405

[Solosound]

Please help me.

I need the rigth value for R943.

The amp had burn one fet, this resitor and 3 more resistors 22ohm .

An externally hosted image should be here but it was not working when we last tested it.

 

[Perry Babin]

The large resistors are 0.22 ohms.

If the resistor to the left of the burned one is 200, 220 or 221 ohms, the burned one is probably a 332 ohm.

 

[Solosound]

Ready

Sorry, I forgot to write: .22

I found Q915 in short too.

Now all the amplifier is working properly.

thanks to Perry and its patience.

 

[Borik]

Help me please.
value resistors R918, 919, 934.

 

[Perry Babin]

If no one else replies, post a photo of the area where the resistors are located.

 

[Borik]

How this will help? They were burned, not visible markings. You have a scheme?
I'm sorry write through the translator.

 

[Perry Babin]

I don't have a schematic diagram or any information on that exact amp. I may have something similar that will help but I need to see what you have.

 

[Borik]

Foto

 

[Perry Babin]

918 and 919 are 475 ohms. 934 is 221 ohms.

 

[Borik]

Perry Babin thanks for your help.

 

[ABCD1]

Hey Perry Babin please help me identifying a couple burned resistors on my mtx thunder 4501 they are completely exploded and i can't read the value they location are R417 and R420
Thank You

 

[Perry Babin]

I don't have any information on that amp but if you contact MTX, they will give you the values.