|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: May 2008
|
A little rusty in my mind on my connection setups.
Running a head unit with Front and Rear amp outputs. Will be connecting a powered sub to the sub output as well. Running 6 speakers in the car, wanted to run two, 4 channel amps. Planned to run two speakers on each input and then bridge the other for the 3rd speaker. So, I run a set of RCA's to one of the subs from the Front output and also another for the Rear. But, do I Y cord the 3rd/4th channel RCA input? I forgot how to set this up! Thanks |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Nov 2007
|
To one of the subs....? Does the HU have sub RCA outs for the powered sub and you just need to run front/rear RCA to the two 4ch amps?
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New setup | BERENO | Car Audio | 13 | 10th August 2008 03:14 AM |
| Suggestions on SQ setup | shumanaudio | Car Audio | 1 | 4th December 2007 02:26 PM |
| 3-way setup | shaunly | Multi-Way | 2 | 31st August 2005 05:30 AM |
| Any tips or suggestions for my setup? | AO | Multi-Way | 0 | 14th July 2004 08:57 PM |
| suggestions required on mosfet matching setup for aleph x | pamaz | Pass Labs | 4 | 20th February 2004 12:17 PM |
| New To Site? | Need Help? |
| Page generated in 0.06750 seconds (64.05% PHP - 35.95% MySQL) with 10 queries |