SoundStream Reference 405S Schematic anyone?

kds9591 · 1st May 2008, 02:50 PM

Anyone have a schematic for a SoundStream Reference 405s? It's a 5 channel amp.

1moreamp · 1st May 2008, 03:58 PM

What info do you need ?

If you post a pic of the area in question we most likely can help you out...

pugdogs · 2nd May 2008, 02:10 AM

Hey Mr.C!

It is good to hear from you again my friend. Yes, please contact 1moreamp for your questions regarding your Reference 405S. He knows his amps VERY WELL! Trust me on this.

There is only a very slight change from the Reference 405 to 405S. It is the input sensitivity. Nothing that would cause a failure with your amp but if you can find a 405 schematic, it will help too. I lost almost all of my documentation a few years ago but C can help you out. He's on top of this stuff.

Good luck to you on your repair and I will keep looking into this thread if needed...but I don't think so. LOL!

pugdogs

Perry Babin · 2nd May 2008, 02:16 AM

I have the schematics for the 405 (no S). If you want them, email me.

babin_perry@yahoo.com

1moreamp · 2nd May 2008, 02:22 AM

Evening Big "L"
Thanks for the kind words. I was hoping the poster would give some clues to the troubles. Somewhere between you, me and Perry I am sure it would be short work

Laters "C"

pugdogs · 2nd May 2008, 02:37 AM

Hey C and P,

LOL! Just catching up here. You guys ROCK!
Yes, a little more detail would be nice. I'll wait for the next posting...hopefully it will help us all out!

Good day to you all!

pugdogs

kds9591 · 5th May 2008, 11:33 AM

Got the schematic, thanks Perry.

It is pretty much a straight forward repair, outputs shorted, ect.
I needed the schematic because some components were burned up and the original MOSFETS for the power supply were previously replaced.

1st May 2008, 02:50 PM	#1
kds9591 diyAudio Member Join Date: Apr 2008 Location: Bensalem, PA	SoundStream Reference 405S Schematic anyone? Anyone have a schematic for a SoundStream Reference 405s? It's a 5 channel amp.

2nd May 2008, 02:16 AM	#4
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	I have the schematics for the 405 (no S). If you want them, email me. babin_perry@yahoo.com __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

5th May 2008, 11:33 AM	#7
kds9591 diyAudio Member Join Date: Apr 2008 Location: Bensalem, PA	SoundStream Reference 405S Schematic Got the schematic, thanks Perry. It is pretty much a straight forward repair, outputs shorted, ect. I needed the schematic because some components were burned up and the original MOSFETS for the power supply were previously replaced.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Soundstream Reference 405s problem	Zreon	Car Audio	15	31st March 2009 04:01 PM
Soundstream Reference 705 Schematic?	djtsmith007	Car Audio	4	13th February 2009 05:11 PM
Soundstream Reference 604	Herb009	Car Audio	7	9th January 2008 08:52 PM
Soundstream reference 404 schematic needed	Original Burnedfingers	Car Audio	8	11th December 2006 09:51 AM
soundstream reference 604	Bgun	Car Audio	9	7th October 2006 04:24 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st May 2008, 03:58 PM	#2
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	What info do you need ? If you post a pic of the area in question we most likely can help you out...

2nd May 2008, 02:10 AM	#3
pugdogs diyAudio Member Join Date: Jan 2008	Hey Mr.C! It is good to hear from you again my friend. Yes, please contact 1moreamp for your questions regarding your Reference 405S. He knows his amps VERY WELL! Trust me on this. There is only a very slight change from the Reference 405 to 405S. It is the input sensitivity. Nothing that would cause a failure with your amp but if you can find a 405 schematic, it will help too. I lost almost all of my documentation a few years ago but C can help you out. He's on top of this stuff. Good luck to you on your repair and I will keep looking into this thread if needed...but I don't think so. LOL! pugdogs

2nd May 2008, 02:22 AM	#5
1moreamp diyAudio Member Join Date: Dec 2005 Location: Northern California	Evening Big "L" Thanks for the kind words. I was hoping the poster would give some clues to the troubles. Somewhere between you, me and Perry I am sure it would be short work Laters "C"

2nd May 2008, 02:37 AM	#6
pugdogs diyAudio Member Join Date: Jan 2008	Hey C and P, LOL! Just catching up here. You guys ROCK! Yes, a little more detail would be nice. I'll wait for the next posting...hopefully it will help us all out! Good day to you all! pugdogs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read