diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   hifonics brutus bxi1206d (http://www.diyaudio.com/forums/car-audio/120282-hifonics-brutus-bxi1206d.html)

ray9043 28th March 2008 01:58 PM

hifonics brutus bxi1206d
 
Hello to all
I have a problem with an amplifier the hifonics brutus bxi1206d which does not turn on and i need the schematic diagram to fix the amp, if someone have the diagram please send me it to the following e-mail: ray9043@hotmail.com

thank you very much

Perry Babin 29th March 2008 12:05 AM

If no one has a schematic diagram, and the amp does nothing when you power it up, you should begin checking the DC voltage on the pins of IC1 on the power supply driver board.

You should have ~12v on pins 8, 11 and 12.

You should have 5v on pin 14.

Pins 3 and 4 should be at or below ~3.3v.

Pin 7 should have 0v.

Place the black meter lead on the ground terminal of the amp for all of the measurements. Remote voltage will be applied for all of the tests above.

bluiezaccord 30th March 2008 05:36 AM

I think i have the same amp that i am not using because it doesnt work.. lol


All times are GMT. The time now is 06:20 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2