Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th December 2007, 06:00 PM   #1
diyAudio Member
 
Join Date: Apr 2005
Location: Bay Area
Default Sourcing Nakamichi parts

Specifically I want to find faceplates and faceplate sub-assemblies for the late model Nakamichi radio (the MB-X in particular).

I am not confident this will be easy to find every day on ebay. I wanted to know given Nakamichi product support isnt on the ball at the moment, are there any recommendations on how to source parts?

Also, I am curious from those here who worked on/repaired nakamichi radios. Does anyone know whether or not the MB-X faceplate is compatible with the MB-100 chassis? Physically yes. But will it work electrically?
  Reply With Quote
Old 27th December 2007, 09:05 PM   #2
MadMutt is offline MadMutt  Australia
diyAudio Member
 
Join Date: Nov 2006
The front panel (sub- assy) should be compatible.
Haven't tried it but they look the same, same circuit ribbon etc.

The main board is almost identicle through the range.
Swapping the main board will require the face to follow with it.
Also need to swap the 'CD' board (right side of chassis), but only to keep the correct convertor rates (24bit/8 bit etc).

Mech is the same, can swap between models with no probs.

(RDS face must be used on RDS boards otherwise you get no display).
The face is NOT (MB100/75 vs MBX) It's fun to see though .
Several buttons light up in different colours, display is blank, none of the buttons work.

Parts, yes, good luck.
Try contacting nak singapore, they seem to be the hub for repairs and info.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help Sourcing Parts HipoFutura Solid State 10 7th December 2006 10:03 PM
Newbie - help sourcing parts TGC and Q's Nordic Chip Amps 2 31st March 2006 05:48 AM
sourcing parts scarole Chip Amps 0 10th May 2005 06:31 AM
Parts Sourcing philipbarrett Tubes / Valves 1 1st March 2005 04:01 AM


New To Site? Need Help?

All times are GMT. The time now is 05:50 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2