Quick FET question

spooney · 5th December 2007, 04:31 AM

Is an STP55NF06 a different or perhaps newer version of the STP55N06? Will it work as a replacement?

jol50 · 5th December 2007, 05:43 AM

It does look a little more beefy and close, but I can't say for sure. Mouser has both and does not cross reference them, but does refer to a NDP6060L for the NF06 and that is the sheet I looked at compared to the N06. Most of the specs look good. I did a Sony that was more off than that and it worked fine, no way was I paying 15 for a TO-220. However most people say the originals should work fine if the amp has no other issues, for what that is worth.

Perry Babin · 5th December 2007, 06:05 AM

If this is for a power supply, they should be interchangeable. The NF version appears to be the replacement.

5th December 2007, 04:31 AM	#1
spooney diyAudio Member Join Date: Dec 2006	Quick FET question Is an STP55NF06 a different or perhaps newer version of the STP55N06? Will it work as a replacement?

5th December 2007, 06:05 AM	#3
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	If this is for a power supply, they should be interchangeable. The NF version appears to be the replacement. __________________ Links >> Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing --- Basic Switching Power Supply Design --- Basic Computer Skills << Links

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick question on the PP-C1 amp	athos56	Tubes / Valves	13	20th October 2007 07:37 PM
Quick quick question !	guitvinny	Pass Labs	6	7th February 2007 05:20 PM
Quick PCB question	Piper	Chip Amps	2	7th March 2005 11:59 AM
VERY quick question...	Wyloch	Multi-Way	2	3rd March 2005 05:34 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th December 2007, 05:43 AM	#2
jol50 diyAudio Member Join Date: Nov 2007	It does look a little more beefy and close, but I can't say for sure. Mouser has both and does not cross reference them, but does refer to a NDP6060L for the NF06 and that is the sheet I looked at compared to the N06. Most of the specs look good. I did a Sony that was more off than that and it worked fine, no way was I paying 15 for a TO-220. However most people say the originals should work fine if the amp has no other issues, for what that is worth.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)