fixin to do the Big 3 - diyAudio
Go Back   Home > Forums > General Interest > Car Audio

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th November 2007, 04:40 AM   #1
skooter is offline skooter  United States
diyAudio Member
 
Join Date: Oct 2007
Default fixin to do the Big 3

amd replace the little battery. would I benifit any getting a good deep cycle battery instead of a standard replacement.
  Reply With Quote
Old 30th November 2007, 09:29 PM   #2
jol50 is offline jol50  United States
diyAudio Member
 
Join Date: Nov 2007
Everyone likes to use 'yellow tops', the gel batteries. I'd say if you don't want to spendy for one then just get the biggest good brand battery that fits in your car. Go 1,000+++ CCA. I would not think enlarging the wire to the stock alternator would help much, but maybe. I'm not sure about deep cycle, they don't put out the current needed to start a car, but may or may not supply an amp. Some trolling motors take a lot so I guess it would work if you don't have huge amps. They hold more power, but odds are you wont run your stereo for hours on end with the car off....then a normal battery would work fine and have more current available from the start, likely be cheaper. It really depends on just how many amps you are going to draw, how many watts.
  Reply With Quote
Old 1st December 2007, 12:26 AM   #3
grjr is offline grjr  United States
diyAudio Member
 
Join Date: Sep 2007
deep cycle batteries are only good if you plan on running your system with the engine off like posted above, and if you run the battery down you won't be able to start your car with it. Just get a standard lead acid battery, it's cheaper and you don't lose much in convenience.
  Reply With Quote
Old 1st December 2007, 03:25 AM   #4
ppia600 is offline ppia600  United States
diyAudio Member
 
Join Date: Jun 2007
Location: Louis y ana
http://cgi.ebay.com/KINETIK-HC800-KH...QQcmdZViewItem

or even better:

http://cgi.ebay.com/KINETIK-HC1400-K...QQcmdZViewItem


here's what I'm using with a different label. I'm running two ppi a600.2s and an earthquake phd2, but I don't leave the system running for long with the car off. This battery still outperforms my stock battery and its less than half the size. It was time to swap my stock one and since I plan on running a fmic and needed room for one of the pipes I got this battery. Haven't killed it or my alternator yet. I may get another to mount in the trunk after I do my motor swap.

http://cgi.ebay.com/ebaymotors/NEW-D...spagenameZWDVW
__________________
Don't worry... you can always turn the gain down!
  Reply With Quote
Old 3rd December 2007, 10:19 AM   #5
Clipped is offline Clipped  Thailand
diyAudio Member
 
Join Date: Mar 2005
Location: home
Send a message via MSN to Clipped
a deep cycle battery would work fine, ive used a few and they lasted a long time...whatever you do dont get an optima 'red top' they arent designed for stereos and will die a fast death if you park and crank it with the engine off...

id do the big three first and see how that works out first though.

if you could id also run another wire from alt to batt...
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 05:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2