Kenwood kac-x201 (part numbers)

SomeDude · 18th October 2007, 11:04 PM

does anyone know where i could download the schematic for this amp so i could figure out the gain switches i need
the part numbers
Thanks SomeDude

Perry Babin · 18th October 2007, 11:52 PM

I posted the part numbers in a previous thread (the one where I suggested you visit kenwoodparts.com). The gain pot is VR1. VR2-VR4 are the same.

SomeDude · 19th October 2007, 01:03 AM

i sure cant find them on that kenwood page maybe you could find me them and post the link
thanks
Somedude

SomeDude · 19th October 2007, 01:12 AM

i figured it out perry
gonna cost me 8.00
thanKs lots and lots
now the soildering part weeeeeeeeeeee
thanks
Somedeude

SomeDude · 19th October 2007, 01:18 AM

there is two difrent types
are they both the same pots or what?
i went ahead and ordered two of them so ill have the right ones i hope if not ill order one more of the one i need
thanks for the help though
Somedude

Perry Babin · 19th October 2007, 01:30 AM

VR1 is one part number and is only used for the gain pot. All 3 of the other pots are a different part number.

SomeDude · 19th October 2007, 11:09 AM

so from top left of the switches is vr1,vr2,vr3,vr4 then?
1-4

SomeDude · 19th October 2007, 11:10 AM

ok what abut the b.m.s frequency one perry?
thats the other one i need
thanks
somedude

Perry Babin · 19th October 2007, 08:35 PM

Place the board in the panel and mark the sensitivity pot. That's VR1. The rest of the pots (VR2-VR4) are different than VR1 but the same as each other. If you need the gain/sensitivity pot, order the part number for VR1. If you need any of the other pots in that group, order the other part number.

SomeDude · 20th October 2007, 12:17 AM

thanks lots perry
i ordered one of each so i ordered a total of 2 one for the input sensitivity and one for the b.m.s freq
ya perry i dont think i would of gotten the right parts with out you bro thanks lots n lots i sure hope itll be an easy fix and if so itll rock
i seen a new one on ebay for like 100.00+
thanks
Somedude

18th October 2007, 11:04 PM	#1
SomeDude diyAudio Member Join Date: Oct 2007	Kenwood kac-x201 (part numbers) does anyone know where i could download the schematic for this amp so i could figure out the gain switches i need the part numbers Thanks SomeDude

18th October 2007, 11:52 PM	#2
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	I posted the part numbers in a previous thread (the one where I suggested you visit kenwoodparts.com). The gain pot is VR1. VR2-VR4 are the same. __________________ Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing

19th October 2007, 01:03 AM	#3
SomeDude diyAudio Member Join Date: Oct 2007	perry i sure cant find them on that kenwood page maybe you could find me them and post the link thanks Somedude

19th October 2007, 01:18 AM	#5
SomeDude diyAudio Member Join Date: Oct 2007	perry there is two difrent types are they both the same pots or what? i went ahead and ordered two of them so ill have the right ones i hope if not ill order one more of the one i need thanks for the help though Somedude

19th October 2007, 01:30 AM	#6
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	VR1 is one part number and is only used for the gain pot. All 3 of the other pots are a different part number. __________________ Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th October 2007, 01:12 AM	#4
SomeDude diyAudio Member Join Date: Oct 2007	i figured it out perry gonna cost me 8.00 thanKs lots and lots now the soildering part weeeeeeeeeeee thanks Somedeude

19th October 2007, 11:09 AM	#7
SomeDude diyAudio Member Join Date: Oct 2007	so from top left of the switches is vr1,vr2,vr3,vr4 then? 1-4

19th October 2007, 11:10 AM	#8
SomeDude diyAudio Member Join Date: Oct 2007	ok what abut the b.m.s frequency one perry? thats the other one i need thanks somedude

19th October 2007, 08:35 PM	#9
Perry Babin diyAudio Member Join Date: Nov 2003 Location: Louisiana	Place the board in the panel and mark the sensitivity pot. That's VR1. The rest of the pots (VR2-VR4) are different than VR1 but the same as each other. If you need the gain/sensitivity pot, order the part number for VR1. If you need any of the other pots in that group, order the other part number. __________________ Basic Car Audio Amp Repair --- Basic Car Audio Electronics --- Basic Transistor Testing

20th October 2007, 12:17 AM	#10
SomeDude diyAudio Member Join Date: Oct 2007	thanks lots perry i ordered one of each so i ordered a total of 2 one for the input sensitivity and one for the b.m.s freq ya perry i dont think i would of gotten the right parts with out you bro thanks lots n lots i sure hope itll be an easy fix and if so itll rock i seen a new one on ebay for like 100.00+ thanks Somedude

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can I get a few part numbers for Pots?	Destroyer OS.	Parts	5	19th January 2006 08:20 AM
transistor part numbers	bjr	Parts	2	4th September 2005 04:26 PM
can't seem to find these part numbers, any ideas???	Htguy	Analogue Source	0	13th July 2005 06:13 AM
SMD part numbers?	nuppe	Parts	0	15th December 2004 10:04 PM
help needed to confirm part numbers	chipco3434	Chip Amps	6	15th August 2004 12:05 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read