Kenwood kac-x201 (part numbers)

[SomeDude]

does anyone know where i could download the schematic for this amp so i could figure out the gain switches i need
the part numbers
Thanks SomeDude

 

[Perry Babin]

I posted the part numbers in a previous thread (the one where I suggested you visit kenwoodparts.com). The gain pot is VR1. VR2-VR4 are the same.

 

[SomeDude]

perry

i sure cant find them on that kenwood page maybe you could find me them and post the link
thanks
Somedude

 

[SomeDude]

i figured it out perry
gonna cost me 8.00
thanKs lots and lots
now the soildering part weeeeeeeeeeee
thanks
Somedeude

 

[SomeDude]

perry

there is two difrent types
are they both the same pots or what?
i went ahead and ordered two of them so ill have the right ones i hope if not ill order one more of the one i need
thanks for the help though
Somedude

 

[Perry Babin]

VR1 is one part number and is only used for the gain pot. All 3 of the other pots are a different part number.

 

[SomeDude]

so from top left of the switches is vr1,vr2,vr3,vr4 then?
1-4

 

[SomeDude]

ok what abut the b.m.s frequency one perry?
thats the other one i need
thanks
somedude

 

[Perry Babin]

Place the board in the panel and mark the sensitivity pot. That's VR1. The rest of the pots (VR2-VR4) are different than VR1 but the same as each other. If you need the gain/sensitivity pot, order the part number for VR1. If you need any of the other pots in that group, order the other part number.

 

[SomeDude]

thanks lots perry
i ordered one of each so i ordered a total of 2 one for the input sensitivity and one for the b.m.s freq
ya perry i dont think i would of gotten the right parts with out you bro thanks lots n lots i sure hope itll be an easy fix and if so itll rock
i seen a new one on ebay for like 100.00+
thanks
Somedude