|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jul 2007
|
Alright electronics gurus here’s the challenge; how do I get the two of these to work together?
http://pinouts.ru/Devices/ipod_pinout.shtml or http://www.ipodlinux.org/Dock_Connector To work with Clarion 13-pin C-bus http://www.ultrajosh.com/images/Clarion_C-Bus.gif Any ideas? The goal is to have the dock/recharge for the iPod work with this setup. |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Mar 2007
|
You can get a walkman to RCA adaptor from Radio Shack. You have the layout of the changer plug. You will have to leave the changer on the bike. You will have to keep a disk in the changer. You will have to split the cable to get to the left and right signal wire. You will need to use a switch to switch between the changer and the I-pod.
__________________
If it ain't broke Don't fix it |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Jul 2007
|
Rats. Was hoping for a better solution since I don't have the changer.
|
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Mar 2007
|
chances are without the changer the radio will not switch to the changer input. It needs to communicate with the changer in order to switch that input.
__________________
If it ain't broke Don't fix it |
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| clarion optical cable - how to make..plz help | anton-sa | Car Audio | 0 | 23rd December 2008 06:26 AM |
| Clarion c-bus and iPod | MrRadi8 | Car Audio | 1 | 14th August 2007 01:04 AM |
| anyone make an Ipod station? | cyborgmexican | Everything Else | 4 | 5th February 2007 02:17 PM |
| Can't make this address work..... | Original Burnedfingers | Tubes / Valves | 4 | 7th July 2006 10:51 AM |
| New To Site? | Need Help? |