diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Car Audio (http://www.diyaudio.com/forums/car-audio/)
-   -   Make an iPod work on Clarion c-bus (http://www.diyaudio.com/forums/car-audio/106829-make-ipod-work-clarion-c-bus.html)

MrRadi8 13th August 2007 05:41 PM

Make an iPod work on Clarion c-bus
 
Alright electronics gurus here’s the challenge; how do I get the two of these to work together?

http://pinouts.ru/Devices/ipod_pinout.shtml or http://www.ipodlinux.org/Dock_Connector

To work with Clarion 13-pin C-bus http://www.ultrajosh.com/images/Clarion_C-Bus.gif

Any ideas? The goal is to have the dock/recharge for the iPod work with this setup.

I Am An Idiot 14th August 2007 01:11 AM

You can get a walkman to RCA adaptor from Radio Shack. You have the layout of the changer plug. You will have to leave the changer on the bike. You will have to keep a disk in the changer. You will have to split the cable to get to the left and right signal wire. You will need to use a switch to switch between the changer and the I-pod.

MrRadi8 14th August 2007 08:24 PM

Rats. Was hoping for a better solution since I don't have the changer.

I Am An Idiot 14th August 2007 09:06 PM

chances are without the changer the radio will not switch to the changer input. It needs to communicate with the changer in order to switch that input.


All times are GMT. The time now is 09:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2