|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th July 2007, 03:20 PM
|
#2 |
|
Did it Himself
diyAudio Member
Join Date: Nov 2003
Location: Gloucestershire, England, UK
|
What do you want to know? Slot box is just a normal ported box. You can do the same with a tube port. There is loads of information on designing ported boxes on here and on other websites, books etc.
__________________
www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more |
|
|
24th July 2007, 03:46 PM
|
#4 |
|
diyAudio Member
Join Date: Jun 2007
|
I haven't decide on the subs and amps ( I might need recommendation on these as well). As for the car, it's Honda Civic sedan type.
I would like to know if the different type of car requires different frequency tuning for the enclosure and how can we find out what frequency? What is the best location to put the enclosure? Trunk? Backseat? How should the sub and slot facing? I've heard that but putting a layer of glass inside the enclosure will actually help to increase the dB. is this true? And bunch of others tips and tricks will be much appreciated |
|
|
|
27th July 2007, 01:33 PM
|
#5 |
|
diyAudio Member
Join Date: Jul 2007
|
What kind of prics are you looking at? www.audioque.com has some great subwoofer(currently upgrading thier models). I had an sd2.5 15", hit 142.9 off a dbm-2.
What kind of vehicle do you have? The trunk is where you'll need to put it. sub facing the back and port facing the side usually has good results. And you probobly heard fiberglass, i wouldn't think you meant actuall glass. putting a layer of resin in the enclosure will help. as far as tuning goes, that depens on listener, sub, box space,etc. If you need someone to design/build a spl enclosure www.outlawsoundsystems.com |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| enclosure design | tenderland | Full Range | 9 | 23rd June 2008 08:03 PM |
| Enclosure design | marky_sparky | Full Range | 8 | 16th August 2007 11:51 PM |
| Enclosure design | audiobahnkid592 | Full Range | 9 | 15th April 2007 05:02 AM |
| Need help with enclosure design | Lusso5 | Multi-Way | 3 | 5th December 2003 09:20 PM |
| building a slot ported enclosure | bassman80hz | Multi-Way | 3 | 26th February 2003 06:59 AM |
| New To Site? | Need Help? |
| Page generated in 0.07829 seconds (75.17% PHP - 24.83% MySQL) with 10 queries |
SPL slot enclosure design
Anybody has experience in SPL competition? I would appreciate if you can share your knowledge in slot enclosure design. Or is there any website on this subject?
