I have two boxes now :) - diyAudio
Go Back   Home > Forums > Blogs > Wintermutes Rantings

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
This is just an area I can blab on about stuff without it using up bandwidth in the threads Hopefully someone will find it interesting or useful.

Tony.
Rate this Entry

I have two boxes now :)

Posted 30th August 2009 at 11:11 AM by wintermute
Updated 25th November 2009 at 11:22 AM by wintermute (categorized)

Glued the rear baffle onto the second of my MTM's today. Had an OH <insert your choice of expletive here> moment just after I placed the baffle onto the speaker. I'd put it on inside out! Now I realise that might sound a bit weird, but because my binding posts are not quite long enough for 25MM MDF I had to route out a few mm to allow me to put the first of two screws on. Anyway luckily I realised pretty quickly and was able to pull it off wipe off the glue, put some more glue down and get it screwed down and clamped without any problems. Would have been a bit of a disaster If I hadn't noticed straight away.

Was planning on putting in the new RCA's to the amp today as well, as a way of bypassing the preamp, but just didn't have the time or the energy. Maybe next weekend

Tony.
Posted in Speakers
Views 805 Comments 0 Email Blog Entry
Total Comments 0

Comments

 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:44 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2