Go Back   Home > Forums > Blogs > Tea-Bag
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

BiB MiniKits

Posted 16th September 2011 at 01:37 AM by Tea-Bag
Updated 17th March 2012 at 02:25 PM by Tea-Bag (changed LEDs to 6/4 ration red/green)

Here I am going to post some semi-commercial information regarding the minikits. Make sure to read the full BiB build manual before ordering parts. The link is posted below.
BIB BUILD GUIDE REV2 BY SALAS

It is essential you understand and purchase for the correct voltage type and range you need for this kit and additional parts.

The purpose here is to report what parts are included in the minikit, and which are not.
This will assist builders in getting the correct parts that are not included in the minikits.

The minikits are made for one of the three sections of the PCB. The board itself can hold two positive and one negative rail type supply.

The kits are purely optional, and are sold to assist the buyer who may not be able to access the resources needed to gather the specific parts.

There are four kit types described below. IRF for voltage 5.5v - 45v in positive or negative rail, and the BJT bipolar's which support lower voltage.

What is NOT included.

No caps, connectors, pots or resistors for set adjustment. No Rx01 resistor, rectifier diodes or stand off screws. No PCB, that's seperate

Mica and small bolt washers are included. The mica may break in transport. Forgive me.

Positive Rail IRF+ (5.5V-45V)
5-2SK117GR
4-Green LEDs
6-Red LEDs
2-Multicomp 1R resistors 1/4W MF 50ppm
2-270R PRP 9372 TC25 1/4 MF 25ppm
1-47R PRP 9372 TC25 1/4W MF 25ppm
1-IRF9610
1-IRF9530
1-BC550C

Negative Rail - IRF- (-5.5v-45v)
5-2SK117GR
4-Green LEDs
6-Red LEDs
2-Multicomp 1R resistors 1/4W MF 50ppm
2-270R PRP 9372 TC25 1/4 MF 25ppm
1-47R PRP 9372 TC25 1/4W MF 25ppm
1-BC560c
1-IRF610
1-IRF530

Positive Low Voltage BJT+ (2.5-5.5v recommended)
5-2SK117GR
4-Green LEDs
6-Red LEDs
2-Multicomp 1R resistors 1/4W MF 50ppm
2-270R PRP 9372 TC25 1/4 MF 25ppm
1-47R PRP 9372 TC25 1/4W MF 25ppm
1-27R PRP 9372 TC25 1/4W MF 25ppm
1-IRF9610
1-MJE15029
1-BC550c


Negative LV Rail. BJT- (-2.5-5.5V RECOMMENDED)

5-2SK117GR
4-Green LEDs
6-Red LEDs
2-Multicomp 1R resistors 1/4W MF 50ppm
2-270R PRP 9372 TC25 1/4 MF 25ppm
1-47R PRP 9372 TC25 1/4W MF 25ppm
1-27R PRP 9372 TC25 1/4W MF 25ppm
1-IRF610
1-MJE15030
1-BC550C
Posted in Uncategorized
Views 3733 Comments 1 Email Blog Entry
Total Comments 1

Comments

  1. Old Comment
    Dear TeaBag,

    Could you be so kind as post the prices for each mini-kits and boards? Or as a suggestion, introduce these on the order spreadsheet in each designated colune.

    Thanks and regards,
    permalink
    Posted 28th April 2012 at 05:58 AM by rclourenco rclourenco is offline
 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 15.79%)
Copyright ©1999-2013 diyAudio