diyAudio - Uncategorized
Go Back   Home > Forums > Blogs > SyncTronX
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Uncategorized Entries with no category
Old

JFET Amplifer and Filter Project

Posted 17th May 2017 at 10:37 PM by SyncTronX
Updated 17th May 2017 at 11:36 PM by SyncTronX (add images)

JFET Amplifier and Filter Project.

Background

A lab was developed with something a little bit more hands on for participants than just blindly doing the NIDA labs. We would benefit from making an N-Channel JFET amplifier and asked if we would be interested. Of course, we werent told the JFET type or gain and didnt know wed also include a bandpass filter. These parameters wed have a drawing from which to choose. Finally, wed have to document and report the entire process in APA format.
Process

Each project is unique and provided on two stapled pages placed upside down in a mixed pile at the front of the room. Each participant was asked to come up and draw their project. I drew project labeled E on the upper right corner of the second page. Included were the following: JFET 2N5485 or 2N5458, Gain set to 22, the Bandpass to be 15kHz 30kHz, and Total Circuit DC Power as Calculated/Measured.
Other resources were...
SyncTronX's Avatar
diyAudio Member
Posted in Uncategorized
Views 312 Comments 2 SyncTronX is offline
Old

Getting Distortion Down

Posted 1st February 2017 at 07:59 AM by SyncTronX
Updated 1st February 2017 at 06:25 PM by SyncTronX

Over in the Low-distrotion, Audio-range,
Oscillator thread (LINK) some posts
about getting lower distortion before taking
the measurement of a DUT (Device Under Test).

Our own RNMarsh posted some good results
running his Panasonic through a miniDSP
box configured as a Low Pass Filter.

He had good results. So I thought and told him
so, and suggested he might get better results doing a band pass filter.

So instead of doing my diode homework for
my Solid State Devices class, I thought I'd
better check, that is put up for shut up.

So, I did and here is what I discovered:

Before filtering:
Click the image to open in full size.

http://www.diyaudio.com/forums/attac...r-baseline.jpg...
SyncTronX's Avatar
diyAudio Member
Posted in Uncategorized
Views 400 Comments 0 SyncTronX is offline
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 02:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki