Fascinating: SMT attenuator retrofitted into ALPs case - diyAudio
Go Back   Home > Forums > Blogs > rjm

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

Fascinating: SMT attenuator retrofitted into ALPs case

Posted 17th December 2011 at 03:08 AM by rjm

http://www.icl.co.jp/audio/att.htm

Less than 3,000 yen, too. Pity it's only available as 100K types, but for tube amps this is a pretty handy little part to have around.
Attached Thumbnails
Click image for larger version

Name:	att-new-4.jpg
Views:	1218
Size:	63.3 KB
ID:	540   Click image for larger version

Name:	att-new-2.jpg
Views:	399
Size:	191.0 KB
ID:	541   Click image for larger version

Name:	att-new-5.jpg
Views:	246
Size:	51.5 KB
ID:	542   Click image for larger version

Name:	att-new-3.jpg
Views:	715
Size:	167.9 KB
ID:	543  
Views 2759 Comments 3 Email Blog Entry
Total Comments 3

Comments

  1. Old Comment
    bear's Avatar
    Afaik, ALPs has always made step attenuators with SMT resistors and even ceramic substrates... the top of their line of course.
    permalink
    Posted 19th December 2011 at 02:54 PM by bear bear is offline
  2. Old Comment
    rjm's Avatar
    Some digging revealed that no, Alps do not and never did make stepped attenuators in the RK27 form factor shown. These are most likely Chinese-made "replacement".

    The idea is that they are drop in replacements for the commonly used Alps pot. Though whether they actually sound better or not, and whether they are more reliable or not, is somewhat of an open question.

    Having used the Alps pots shown, my own experience is that even a simple home built stepped attenuator sounds better - even as it may be less convenient - and I have recently used stepped attenuators exclusively in my own equipment.
    permalink
    Posted 20th December 2011 at 12:17 AM by rjm rjm is offline
  3. Old Comment
    bear's Avatar
    Ah I see what you are saying... I understand that the little SMT resistors have issues even at line level, too low in power. Might be neat if paralleled or higher power SMTs were used... but then only if one needs the smaller form factor I would think...
    Interesting though.
    permalink
    Posted 20th December 2011 at 12:53 AM by bear bear is offline
 
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 03:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2