diyAudio - Entries for April 3, 2014
Go Back   Home > Forums > Blogs > rjm

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Old

The case of the crazy Sapphire amp.

Posted 3rd April 2014 at 02:24 AM by rjm
Updated 3rd April 2014 at 12:07 PM by rjm

Case report:

A set of Sapphire boards gave the proper V+, V- voltages out of the Z-reg, providing about 10.5 and -10.5 to op amp power pins. The output offsets were unusually high however, apparently at about 2 V in one board, and somewhat less in the other. Typically the offsets are in the order of +/-15 mV.

Changing out transistors and op amps did not help, and to all inspection the passive components were installed correctly and working properly. The offset voltages were extremely temperature sensitive. Measurements for the various circuit voltages were just screwy enough to be inconclusive.

I could ask for no more tests, so requested the boards be sent back to me. I found the circuit basically worked as expected, but the offsets were indeed high on both boards, though I measured 0.6 V max rather than 2 V.

***** stop here and make a guess *****

Blowing on the board through a soda straw, the offset shot up when I blew on...
Attached Thumbnails
Click image for larger version

Name:	DSC_1611s.jpg
Views:	169
Size:	405.5 KB
ID:	1263  
rjm's Avatar
rjm
diyAudio Member
Views 413 Comments 0 rjm is online now
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 04:37 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2