3 way post #7 - woofer distortion measurements - diyAudio
Go Back   Home > Forums > Blogs > Rob's active 3way with transconductance chipamps build blog
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
My build blog for my active 3 ways.
Rate this Entry

3 way post #7 - woofer distortion measurements

Posted 15th November 2009 at 07:36 PM by relder

So - I setup Soundeasy to take some distortion measurements. I don't claim to be a wizard at taking these measurements and balancing the various factors (overloading the mic, etc.) so take 'em with some grains of salt but they are interesting.

Taken with a Behringer ECM8000 mic (uncalibrated) via a UB802 to a M-audio 410 PCI card.

You can pretty clearly see my noise floor. Taken in a living room with computers/fridges turned off, noisy computer in another room.

Mic was nearfield.

There's some clear differences between the plots when driven with current vs. voltage. Ignore the nasty bits around resonance for the current driven one - I clipped the soundcard input with the resonance peak.
Attached Thumbnails
Click image for larger version

Name:	SE-peerless-nearfield-distortion-VS.gif
Views:	452
Size:	33.0 KB
ID:	40   Click image for larger version

Name:	SE-peerless-nearfield-distortion-MidS.gif
Views:	370
Size:	33.7 KB
ID:	41   Click image for larger version

Name:	SE-peerless-nearfield-distortion-CS.gif
Views:	350
Size:	36.5 KB
ID:	42  
Posted in 3 Way
Views 609 Comments 0
Total Comments 0


Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 08:14 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2